Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: INDUSTRIAL ELECTROPLATING COMPANY,INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of INDUSTRIAL ELECTROPLATING COMPANY,INC. in 307 S. LINWOOD RD., GASTONIA, NC 28053 (NAICS 000000). OSHA activity number 302648365.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Industrial Electroplating Company,Inc. — free Get an email when a new federal OSHA severe-injury report for Industrial Electroplating Company,Inc. is published. One employer, no account, unsubscribe in one click.
Site address
307 S. LINWOOD RD.
City
GASTONIA
State
NC
ZIP
28053
Mailing
P.O. BOX 1537, GASTONIA, NC 28053
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
3471
Employees
71
Ownership type
A
Industry flags
Manufacturing safety.

12 citations on file for this inspection.

95012901

Serious 19 instances 6 exposed
Issued
Mar 29, 1999
Abate by
Apr 16, 1999
Penalty
Initial $525 · Current $525
North Carolina General Statute 95-129(1) of the Occupational Safety
and Health Act of North Carolina:  The employer did not furnish to
each of his employees conditions of employment and a place of
employment which were free from recognized hazards that were
causing or likely to cause death or serious physical harm to
employees:
a) facility; black oxide room - crane systems with budgit 1
ton hoists have not been load tested
b) facility; nickel room - crane systems with budgit 1 ton
hoists have not been load tested
c) facility; rack/zinc #2 room - crane systems with budgit
1 ton hoists and Jessup engineered hoists have not been
load tested.
d) facility; barrell zinc #2/Nickel #2 room - crane systems
with budgit 1 ton hoists have not been load tested.
e) facility; Big Jessup Line - crane systems with budgit 1
ton hoists, 1/2 ton CM hoists, and Jessup engineered
hoists have not been load tested.
Reference:  ANSI B30.11 - 1980 section 11-2.2.2 (a) prior to
initial use, all new, extensively repaired, and altered
equipment should be tested ....
NOTE:  Among means of abatement, one feasible means of
abatement is to have the crane systems load tested.

95012901

Serious 19 instances 6 exposed
Issued
Mar 29, 1999
Abate by
Apr 16, 1999
Penalty
Initial $525 · Current $525
North Carolina General Statute 95-129(1) of the Occupational Safety
and Health Act of North Carolina:  The employer did not furnish to
each of his employees conditions of employment and a place of
employment which were free from recognized hazards that were
causing or likely to cause death or serious physical harm to
employees:
a) facility; black oxide room - crane systems with budgit 1
ton hoists have not received frequent or periodic
inspections
b) facility; nickel room - crane systems with budgit 1 ton
hoists have not received frequent or periodic inspections
c) facility; rack/zinc #2 room - crane systems with budgit
1 ton hoists and Jessup engineered hoists have not
received frequent or periodic inspections.
d) facility; barrell zinc #2/Nickel #2 room - crane systems
with budgit 1 ton hoists have not received frequent or
periodic inspections.
e) facility; Big Jessup Line - crane systems with budgit 1
ton hoists, 1/2 ton CM hoists, and Jessup engineered
hoists have not received frequent or periodic inspections
Reference:  ANSI B30.11 - 1980 section 11-2.1.1 (a) prior to
initial use, all new, altered, modified, or extensively
repaired cranes and monorail systems shall be inspected..as
per paragraph (b) inspections shall be conducted on a frequent
and periodic basis.
NOTE:  Among means of abatement, one feasible means of
abatement is to have the crane systems inspected on a frequent
and periodic basis

1910.151 C

Serious 5 instances 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999
Penalty
Initial $188 · Current $188

1910.213 I01

Serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999
Penalty
Initial $188 · Current $188

1910.304 F04

Serious 3 instances 2 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999
Penalty
Initial $375 · Current $375

1910.212 A03 II

Serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999
Penalty
Initial $188 · Current $188

1910.22 D01

Other-than-serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999

1910.37 Q01

Other-than-serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999

1910.242 B

Other-than-serious 5 instances 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999

1910.303 G01 II

Other-than-serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999

1910.305 B01

Other-than-serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999

1910.178 Q07

Other-than-serious 1 instance 1 exposed
Issued
Mar 29, 1999
Abate by
Apr 5, 1999

View Industrial Electroplating Company,Inc.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302648365.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.