PROVIDENCE, RI —
OSHA Inspection: SALVADORE TOOL & FINDINGS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SALVADORE TOOL & FINDINGS INC in 24 ALTHEA STREET, PROVIDENCE, RI 02907 (NAICS 000000). OSHA activity number 302672100.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SALVADORE TOOL & FINDINGS INC
- Site address
- 24 ALTHEA STREET
- City
- PROVIDENCE
- State
- RI
- ZIP
- 02907
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3915
- Employees
- 48
- Ownership type
- A
Citations
24 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 11, 2001
- Abate by
- Mar 6, 2002
- Penalty
- Initial $900 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that, on or about 05/11/01, an employee was working on a drop hammer which was inadequately guarded by a mechanical sweep which exposed employees to the potential hazards of being struck by the sweep during the downward stroke, being caught in the point of operation, and/or being struck by splintering stock: Among other methods, one feasible and acceptable abatement method to correct this hazard is to provide an interlocking movable barrier gate. OR IN THE ALTERNATIVE: 29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by mechanical sweep devices, point of operation and splintering die sock: a) Single Stroke Press Room: The drop hammers were not provided with an adequate guard exposing employees to the hazards of being struck by the mechanical sweep devices, the point of operation during the downward stroke and from being struck by splintering die stock.
Recent events (3)
- — P (S) $450.00
- — I (S) $450.00
- — Z (S) $900.00
1910.147 C04 I
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
- Penalty
- Initial $1,200 · Current $600 Reduced
Recent events (2)
- — I (S) $600.00
- — Z (S) $1200.00
1910.151 C
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
- Penalty
- Initial $1,275 · Current $638 Reduced
Recent events (2)
- — I (S) $637.50
- — Z (S) $1275.00
1910.178 L
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
- Penalty
- Initial $1,200 · Current $600 Reduced
Recent events (2)
- — I (S) $600.00
- — Z (S) $1200.00
1910.178 Q07
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.212 A01
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
- Penalty
- Initial $1,200 · Current $600 Reduced
Recent events (2)
- — I (S) $600.00
- — Z (S) $1200.00
1910.217 C02 IA
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
- Penalty
- Initial $900 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $900.00
1910.219 C04 I
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
- Penalty
- Initial $900 · Current $900
Recent events (2)
- — I (S) $900.00
- — Z (S) $900.00
1910.219 E05 I
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
- Penalty
- Initial $900 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $900.00
1910.219 E03 I
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
1910.252 B02 III
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
- Penalty
- Initial $900 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $900.00
1910.252 A02 XIII
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.1200 E01 I
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
- Penalty
- Initial $6,000 · Current $3,600 Reduced
Recent events (2)
- — I (R) $3600.00
- — Z (R) $6000.00
1910.1200 E02 III
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.1200 F05 I
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
1910.1200 G01
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.1200 H
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.22 D01
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.37 Q02
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
1910.37 Q05
- Issued
- Jun 11, 2001
- Abate by
- Jun 14, 2001
1910.132 D01
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.132 F01
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.145 C03
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
1910.217 E01 I
- Issued
- Jun 11, 2001
- Abate by
- Dec 6, 2001
More inspections at Salvadore Tool & Findings INC
View Salvadore Tool & Findings INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302672100.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.