AUBURN, NY —
OSHA Inspection: AUBURN TECHNOLOGY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AUBURN TECHNOLOGY, INC. in 151 ORCHARD STREET, AUBURN, NY 13021 (NAICS 000000). OSHA activity number 302691423.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AUBURN TECHNOLOGY, INC.
- Site address
- 151 ORCHARD STREET
- City
- AUBURN
- State
- NY
- ZIP
- 13021
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3728
- Employees
- 280
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load should the overhead hoist, supporting structure or the below the hook lifting device fail: a)Chemical treatment area, on or about 07/13/00: Overhead hoist used for lifting materials above the acid bath. 1.Load chain link was damaged at the lifting hook. 2.Safety clip was not installed on lifting hook. ABATEMENT NOTES: Among other methods, one feasible method of abatement is to: 1.Replace damaged load chain as per ASME B30.16-1987. 2.Replace safety clip as per ASME B30.16-1987. b)Chemical treatment area, on or about 07/13/00: Below the hook lifting device for lifting materials from acid bath had no rated load capacity markings and no initial, frequent or periodic inspections performed. ABATEMENT NOTES: Among other methods, one feasible method of abatement is to: 1.Prior to use all new, modified, or repaired lifting devices shall be inspected by a designated person and an operational test performed to insure compliance. 2.Mark the rated load capacity of the lifting device on the main structure or equivalent. 3). Conduct frequent and periodic inspections of the lifting devices for wear, deterioration, or malfunction in accordance with ASME B30.20.
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
1910.27 D01 II
- Issued
- Aug 25, 2000
- Abate by
- Sep 17, 2000
- Penalty
- Initial $1,875 · Current $1,219 Reduced
Recent events (2)
- — I (S) $1218.75
- — Z (S) $1875.00
1910.27 F
- Issued
- Aug 25, 2000
- Abate by
- Sep 17, 2000
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C04 I
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,875 · Current $1,219 Reduced
Recent events (2)
- — I (S) $1218.75
- — Z (S) $1875.00
1910.179 E04
- Issued
- Aug 25, 2000
- Abate by
- Sep 27, 2000
- Penalty
- Initial $1,875 · Current $1,219 Reduced
Recent events (2)
- — I (S) $1218.75
- — Z (S) $1875.00
1910.212 A05
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
1910.213 D01
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
1910.213 H04
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
1910.213 S06
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
Recent events (2)
- — I (S)
- — Z (S)
1910.215 A04
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
1910.215 B09
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
Recent events (2)
- — I (S)
- — Z (S)
1910.215 D03
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
Recent events (2)
- — I (S)
- — Z (S)
1910.253 B02 II
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
1910.304 F04
- Issued
- Aug 25, 2000
- Abate by
- Aug 30, 2000
- Penalty
- Initial $1,500 · Current $975 Reduced
Recent events (2)
- — I (S) $975.00
- — Z (S) $1500.00
More inspections at Auburn Technology, INC.
View Auburn Technology, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302691423.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.