Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: ROBERT BARROW CONSTRUCTION

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of ROBERT BARROW CONSTRUCTION in 910 CAMPBELL, KERSEY, CO 80644 (NAICS 000000). OSHA activity number 302766548.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Robert Barrow Construction for free Get an email when a new federal OSHA severe-injury report for Robert Barrow Construction is published. One employer, no account, unsubscribe in one click.
Site address
910 CAMPBELL
City
KERSEY
State
CO
ZIP
80644
Mailing
4414 E. HARMONY RD., FORT COLLINS, CO 80525
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
1761
Employees
10
Ownership type
A

2 citations on file for this inspection.

1926.501 B10

Serious Gravity 10 1 instance 8 exposed
Issued
Oct 7, 1999
Abate by
Oct 18, 1999
Penalty
Initial $1,500 · Current $600 Reduced
Recent events (2)
  • · I (S) $600.00
  • · Z (S) $1500.00

5(a)(1)

Other-than-serious Gravity 02 1 instance 6 exposed
Issued
Oct 7, 1999
Abate by
Nov 2, 1999
Penalty
Initial $300 · Current $120 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:
The employer did not furnish employment and a place of employment
which were free from recognized hazards that were causing or likely
to cause death or serious physical harm to employees in that
employees were exposed to fall hazards while using a personnel
platform on a rough terrain forklift:
Among other methods, one feasible and acceptable abatement method
to correct these hazards is to retrain all employees and monitor
the actions of the crews through inspections and interviews.
a)  At 910 Campbell, Kersey, CO. (Sinnett Builders Inc.
jobsite):  Employees using a personnel platform on a rough
terrain forklift were exposed to falls due to not adhering to
the following ANSI and company operating/training guidelines.
1.  ASME/ANSI B56.6c-1991:  5.15.1(i),(l),(r), and (u):
2.  Company operating procedures: (f.iii), (m.i,iii,iv)
DISCUSSION OF 5A1 ELEMENTS:
1.  The employer failed to keep the workplace free of a hazard to
which employees of that employer were exposed:
The employees of Robert Barrow Const were exposed to fall hazards
due to several improper actions taken with the use of a rough
terrain forklift.  The lift was being used to raise personnel on a
platform.  There were foremen for the company who were designated
operators of the lift making some of the mistakes in set-up.
2.  The hazard was recognized:
The ansi standard dealing with this type of lift was sent to the
CSHO by the company owner.  He had acquired it years before from a
consultant.  The company training rules were also broken.  The
construction industry recognizes the danger of these lifts
3.  The hazard was causing or was likely to cause death or serious
physical harm:
The lift was being used at heights of 25 feet and over.  Falls from
that distance result in broken bones, internal injuries, and death.
4.  There was a feasible and useful method to correct the hazard:
The employees on site had been trained years before and didn't do
too bad a job of using the lift.  Retraining and enforcement of the
company operating procedures would fix this problem.
Recent events (2)
  • · I (O) $120.00
  • · Z (S) $300.00

View Robert Barrow Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302766548.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.