MISSOULA, MT —
OSHA Inspection: MARK RITE LINES OF MONTANA, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MARK RITE LINES OF MONTANA, INC. in RESERVE & PAXTON, MISSOULA, MT 59801 (NAICS 000000). OSHA activity number 302894332.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARK RITE LINES OF MONTANA, INC.
- Site address
- RESERVE & PAXTON
- City
- MISSOULA
- State
- MT
- ZIP
- 59801
- Mailing
- P.O. BOX 31431, BILLINGS, MT 59107
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1721
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 25, 2000
- Abate by
- Oct 1, 2000
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) The hazard of falling from a moving truck on or about 4 May 2000 and at times prior thereto while setting and picking up traffic cones from the bed or running board of a flat bed truck traveling down the highway during line painting operations. Among other methods, one feasible and acceptable abatement method to correct this hazard is provide a protective work platform equipped with suitable fall protection and/or safety harness and lanyard. __ Abatement certification or documentation is NOT required for this item. __ Abatement certification is required for this item. X_ Abatement certification and documentation are required for this item. __ Warning tag (or citation copy) required on this equipment before moving.
Recent events (2)
- — I (S) $1500.00
- — Z (S) $3000.00
5(a)(1)
- Issued
- Aug 25, 2000
- Abate by
- Sep 2, 2000
- Penalty
- Initial $3,000 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) The hazard of being crushed or impaled as the result of a rear end collision on or about 4 May 2000 and at times prior thereto while riding on the unprotected bed of the mobile truck mounted crash attenuator vehicle which is used to protect the lives and equipment operating on highways during line painting operations. Among other methods, one feasible and acceptable abatement method to correct this hazard is permit only the operator of the mobile truck mounted crash attenuator to be in the vehicle when it is deployed for its intended purpose. __ Abatement certification or documentation is NOT required for this item. __ Abatement certification is required for this item. X_ Abatement certification and documentation are required for this item. __ Warning tag (or citation copy) required on this equipment before moving.
Recent events (2)
- — I (S) $1500.00
- — Z (S) $3000.00
1926.50 C
- Issued
- Aug 25, 2000
- Abate by
- Oct 31, 2000
- Penalty
- Initial $3,000
Recent events (2)
- — I (O)
- — Z (S) $3000.00
1926.50 D01
- Issued
- Aug 25, 2000
- Abate by
- Aug 31, 2000
Recent events (2)
- — I (O)
- — Z (S)
5(a)(1)
- Issued
- Aug 25, 2000
- Abate by
- Sep 2, 2000
- Penalty
- Initial $3,000 · Current $3,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) The hazard of being crushed by the crash attenuator on or about 4 May 2000 and at times prior thereto when it was unexpectedly lowered. Among other methods, one feasible and acceptable abatement method to correct this hazard is to install the controls according to the manufactures instructions. __ Abatement certification or documentation is NOT required for this item. __ Abatement certification is required for this item. X_ Abatement certification and documentation are required for this item. __ Warning tag (or citation copy) required on this equipment before moving.
1904.2 A
- Issued
- Aug 25, 2000
- Abate by
- Aug 31, 2000
- Penalty
- Initial $120 · Current $120
Recent events (2)
- — I (R) $120.00
- — Z (R) $120.00
More inspections at Mark Rite Lines of Montana, INC.
View Mark Rite Lines of Montana, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 302894332.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.