FOREST CITY, NC —
OSHA Inspection: AFA PRODUCTS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AFA PRODUCTS, INC. in 135 PINE STREET, FOREST CITY, NC 28043 (NAICS 000000). OSHA activity number 303089460.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AFA PRODUCTS, INC.
- Site address
- 135 PINE STREET
- City
- FOREST CITY
- State
- NC
- ZIP
- 28043
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3089
- Employees
- 341
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
95012901
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $688 · Current $688
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)facility; throughout such as shop - Scissor type below the hook lifting device has not been load tested. REFERENCE: ANSI B30.20 - 1985; Below the hook lifting devices (Paragraph 20-1.4.2 - Rated load test) Prior to initial use, all new, altered, modified, or repaired lifting devices should be tested... NOTE: One acceptable and feasible methods of abatement is to have the below the hook devices load tested.
1910.184 E04
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
95012901
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $688 · Current $688
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)facility; throughout such as shop - Scissor type below the hook lifting device has not had frequent or periodic inspection. REFERENCE: ANSI B30.20 - 1985; Below the hook lifting devices (Paragraph 20-1.3.1 Inspection) Prior to initial use, all new, altered, modified, or repaired lifting devices shall be inspected...(b) on a frequent and periodic inspection. NOTE: One acceptable and feasible methods of abatement is to have the below the hook devices inspected on a frequent and annual basis.
1910.184 D
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
95012901
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $963 · Current $963
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)facility; Tool Room - 2 floor mounted jib crane systems with 3 ton budgit hoists have not been load tested. b)facility; North Molding - underhung crane system with 3 ton Shaw Box hoist has not been load tested. REFERENCE: ANSI B30.11 - 1998 paragraph 11-2.2.2 Load test - New, reinstalled, altered, repaired, and modified equipment should be load tested prior to initial use... NOTE: One feasible and acceptable method of abatement is to have all the crane systems load tested.
95012901
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $963 · Current $963
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a)facility; tool room - 2 floor mounted jib crane systems with 3 ton budgit hoists have not had frequent or periodic inspections. b)facility; north molding - underhung crane system with 3 ton Shaw Box hoist have not had frequenet or periodic inspections. c)facility; south molding - underhung crane system with 3 ton Shaw Box hoist has not had frequent or periodic inspections. d)facility; new maintenance shop - underhung crane system with 5 ton Shaw Box has not had frequent or periodic inspections. REFERENCE: ANSI B30.11 - 1998 paragraph 11-2.1.1 Inspection - Prior to initial use, all new, reinstalled, altered, or modified crane and monorail systems shall be inspected...(b) on a frequent and periodic basis. NOTE: One feasible and acceptable method of abatement is to have all the crane systems inspected on a frequent and periodic basis.
1910.23 C01
- Issued
- Sep 24, 1999
- Abate by
- Jan 31, 2000
- Penalty
- Initial $688 · Current $688
Recent events (2)
- — P (S) $688.00
- — Z (S) $688.00
1910.215 B09
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $688 · Current $688
1910.215 A04
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
1910.303 B02
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $963 · Current $963
1910.304 F04
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
- Penalty
- Initial $963 · Current $963
1910.157 C01
- Issued
- Sep 24, 1999
- Abate by
- Sep 29, 1999
1910.212 A03 II
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
1910.212 B
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
1910.213 I01
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
1910.242 B
- Issued
- Sep 24, 1999
- Abate by
- Sep 29, 1999
1910.1200 E01 I
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
1910.1200 H
- Issued
- Sep 24, 1999
- Abate by
- Oct 12, 1999
More inspections at AFA Products, INC.
View AFA Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 303089460.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.