BRYAN, OH —
OSHA Inspection: PLAS-TECH ENGINEERED PRODUCTS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PLAS-TECH ENGINEERED PRODUCTS INC. in 918 S. UNION ST., BRYAN, OH 43506 (NAICS 000000). OSHA activity number 303467005.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PLAS-TECH ENGINEERED PRODUCTS INC.
- Site address
- 918 S. UNION ST.
- City
- BRYAN
- State
- OH
- ZIP
- 43506
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3089
- Employees
- 350
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
24 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees. On or about October 25, 2001, and November 21, 2001, employees were exposed to the hazard of equipment failure associated with the Horizontal Injection Molding Machines, in that Plastech Exterior Systems, Inc. did not institute a policy and procedure for conducting periodic and regular inspections of the Horizontal Injection Molding Machines. Feasible means of abatement could have been achieved by establishing a complete program of periodic and regular inspections of Horizontal Injection Molding Machines in accordance with ANSI/SPI B151.1 1997 section 4.3. Additional abatement information is required for this item.
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.22 A02
- Issued
- Apr 23, 2002
- Abate by
- May 17, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.23 A08
- Issued
- Apr 23, 2002
- Abate by
- Apr 26, 2002
- Penalty
- Initial $2,000
Recent events (2)
- — F (O)
- — Z (S) $2000.00
1910.147 C04 I
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.147 C05 I
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.147 C06 I
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.157 G01
- Issued
- Apr 23, 2002
- Abate by
- May 17, 2002
- Penalty
- Initial $2,000
Recent events (2)
- — F (O)
- — Z (S) $2000.00
1910.178 P01
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (S)
- — Z (S) $2500.00
1910.179 L03 I
- Issued
- Apr 23, 2002
- Abate by
- Apr 26, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (S)
- — Z (S) $2500.00
1910.212 A03 II
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (O)
- — Z (S) $2500.00
1910.253 B04 III
- Issued
- Apr 23, 2002
- Abate by
- Apr 26, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (O)
- — Z (S) $2500.00
1910.303 B01
- Issued
- Apr 23, 2002
- Abate by
- Apr 26, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (O)
- — Z (S) $2500.00
1910.305 B01
- Issued
- Apr 23, 2002
- Abate by
- Apr 26, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (O)
- — Z (S) $2500.00
5(a)(1)
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000 · Current $1,000 Reduced
Recent events (2)
- — F (S) $1000.00
- — Z (S) $5000.00
1910.22 A02
- Issued
- Apr 23, 2002
- Abate by
- May 17, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.147 C04 I
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000 · Current $1,000 Reduced
Recent events (2)
- — F (S) $1000.00
- — Z (S) $5000.00
1910.147 C05 I
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.147 C06 I
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $5,000
Recent events (2)
- — F (S)
- — Z (S) $5000.00
1910.178 P01
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $2,500 · Current $2,000 Reduced
Recent events (2)
- — F (S) $2000.00
- — Z (S) $2500.00
1910.179 L03 I
- Issued
- Apr 23, 2002
- Abate by
- Apr 26, 2002
- Penalty
- Initial $2,500
Recent events (2)
- — F (S)
- — Z (S) $2500.00
1910.23 C01
- Issued
- Apr 23, 2002
- Abate by
- Apr 27, 2002
- Penalty
- Initial $70,000 · Current $40,000 Reduced
Recent events (2)
- — F (U) $40000.00
- — Z (W) $70000.00
1910.147 D04 I
- Issued
- Apr 23, 2002
- Abate by
- Apr 27, 2002
- Penalty
- Initial $70,000 · Current $40,000 Reduced
Recent events (2)
- — F (U) $40000.00
- — Z (W) $70000.00
1910.179 J02
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $12,500 · Current $10,000 Reduced
Recent events (2)
- — F (S) $10000.00
- — Z (S) $12500.00
1910.303 G02 II
- Issued
- Apr 23, 2002
- Abate by
- May 1, 2002
- Penalty
- Initial $12,500 · Current $4,000 Reduced
Recent events (2)
- — F (S) $4000.00
- — Z (S) $12500.00
More inspections at Plas-Tech Engineered Products INC.
View Plas-Tech Engineered Products INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 303467005.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.