GEORGE WEST, TX —
OSHA Inspection: EASTERN OIL WELL SERVICE COMPANY
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of EASTERN OIL WELL SERVICE COMPANY in GRAHAM WELL #1, 1 MI N CR 343 & FM 534, GEORGE WEST, TX 78022 (NAICS 000000). OSHA activity number 303688584.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EASTERN OIL WELL SERVICE COMPANY
- Site address
- GRAHAM WELL #1, 1 MI N CR 343 & FM 534
- City
- GEORGE WEST
- State
- TX
- ZIP
- 78022
- Mailing
- PO BOX 797, CARRIZO SPRINGS, TX 78834
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 1389
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 9, 2002
- Abate by
- Oct 18, 2002
- Penalty
- Initial $875 · Current $525 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck-by hazard: At this well workover site, employees did not practice the full control of hazardous energy such as potential energy of falling mechanical parts during the repair of workover rigs. Among other methods, one feasible and acceptable abatement method to correct this hazard is to establish and enforce accepted safe practices as discussed under the API RP 54, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations, (3rd Ed., August 1999). Section 6.9.1, Lockout/Tagout.
Recent events (2)
- — F (S) $525.00
- — Z (S) $875.00
5(a)(1)
- Issued
- Oct 9, 2002
- Abate by
- Oct 24, 2002
- Penalty
- Initial $1,250
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a vehicle crash hazard: At this well workover site, the employer did not ensure that workover rig haulers were kept in safe working order such as a driver cab windshield and windows free of obvious defects. Cracked windows could obstruct the driver's view of personnel and property during hauling and vehicle positioning on site. Among other methods, one feasible and acceptable abatement method to correct this hazard is to establish and enforce safe practices discussed under the Association of Energy Service Companies' (AESC) Recommended Safe Procedures and Guidelines for Oil and Gas Well Servicing (January 1997). Section VIII, Rig Safety Inspection.
Recent events (2)
- — F (S)
- — Z (S) $1250.00
5(a)(1)
- Issued
- Oct 9, 2002
- Abate by
- Nov 4, 2002
- Penalty
- Initial $875
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck-by or collapse hazard: At this well workover site, the employer failed to maintain anchor lines (wire ropes) and hoisting chains (matting boards) from excess corrosion and pitting and to remove these equipment prior to work. Among other methods, one feasible and acceptable abatement method to correct this hazard is to establish and enforce safe practices as addressed in API's RP 54, Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations (3rd Ed.,August 1999). Section 9.6.3.
Recent events (2)
- — F (S)
- — Z (S) $875.00
1910.23 C02
- Issued
- Oct 9, 2002
- Abate by
- Nov 4, 2002
- Penalty
- Initial $525 · Current $315 Reduced
Recent events (2)
- — F (S) $315.00
- — Z (S) $525.00
1910.151 B
- Issued
- Oct 9, 2002
- Abate by
- Oct 18, 2002
- Penalty
- Initial $525
Recent events (2)
- — F (S)
- — Z (S) $525.00
More inspections at Eastern OIL Well Service Company
View Eastern OIL Well Service Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 303688584.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.