TELFORD, PA —
OSHA Inspection: D W CUSTOM PAINTING INCORPORATED
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of D W CUSTOM PAINTING INCORPORATED in 514 TOWNSHIP LINE ROAD, TELFORD, PA 18969 (NAICS 000000). OSHA activity number 303722268.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D W CUSTOM PAINTING INCORPORATED
- Site address
- 514 TOWNSHIP LINE ROAD
- City
- TELFORD
- State
- PA
- ZIP
- 18969
- Mailing
- 1396 ROSTRAVER ROAD, BELLE VERNON, PA 15012
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3272
- Employees
- 9
- Ownership type
- A
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 7, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $525 · Current $525
9010
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of silicosis from chronic and acute silica (respirable crystalline quartz) dust exposure during precast concrete cell finishing and were not included in a medical surveillance program: a) An employee (laborer) was exposed to silica (respirable crystalline quartz) during abrasive blasting and power tool grinding on concrete cells at concentrations up to 159 times the permissible exposure level. The employee was not included in a medical surveillance program to detect early sign of silica related lung disease, on or about September 13, 2001. A feasible method of abatement includes, but is not limited to, implementation of a medical surveillance program which incorporates the following elements: 1) A baseline examination which includes a medical and occupational history to elicit data on signs and symptoms of respiratory disease prior to exposure to crystalline silica. The medical examination emphasizing the respiratory system should be repeated every 5 years if under 20 years of exposure and every 2 years if over 20 years of exposure. The medical examination should be repeated more frequently if respiratory symptoms develop or upon the recommendation of the examining physician. 2) A baseline chest x-ray should be obtained prior to employment with a follow up every 5 years if under 20 years of exposure and every 2 years if over 20 years of exposure. Chest x-rays should be chest roentgenograms (posteroanterior 14" X 17" or 14" X 14") classified according to the 1970 ILO International Classification of Radiographs of Pneumoconiosis by a certified "B" reader. A chest x-ray may be required more frequently if determined by the examining physician. 3) Pulmonary Function Tests (PFT) should include FEV1 (forced expiratory volume in 1 second), FVC (force vital capacity) and DLCO (diffusion lung capacity). PFTs should be obtained for a baseline examination with PFTs repeated every 5 years if under 20 years of exposure and every 2 years if over 20 years of exposure. PFTs may be required more frequently if respiratory symptoms develop or if recommended by the examining physician. 4) A chest x-ray should be obtained upon employment termination. 5) The specific element of the program should be determined by an occupational physician specializing in diseases of the lungs. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.tives
Recent events (2)
- — I (S) $525.00
- — Z (S) $525.00
1910.95 D01
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
- Penalty
- Initial $525 · Current $525
1910.95 G01
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
1910.95 K01
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
1910.132 A
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
- Penalty
- Initial $525 · Current $525
1910.1000 C
- Issued
- Dec 6, 2001
- Abate by
- Feb 7, 2002
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.1000 E
- Issued
- Dec 6, 2001
- Abate by
- Feb 7, 2002
1910.134 D01 I
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
1910.94 A05 IIIB
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
1910.134 C01 V
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
- Penalty
- Initial $315 · Current $315
1910.134 D03 IIIB2
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
1910.134 E01
- Issued
- Dec 6, 2001
- Abate by
- Dec 11, 2001
1910.134 F02
- Issued
- Dec 6, 2001
- Abate by
- Dec 11, 2001
1910.134 G01 IA
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
1910.1200 E01
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
- Penalty
- Initial $1,500 · Current $1,050 Reduced
Recent events (2)
- — I (S) $1050.00
- — Z (S) $1500.00
1910.1200 G01
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
1910.1200 H
- Issued
- Dec 6, 2001
- Abate by
- Dec 24, 2001
1910.106 E02 IVD
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
1910.141 D02 I
- Issued
- Dec 6, 2001
- Abate by
- Dec 14, 2001
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 303722268.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.