STATESBORO, GA —
OSHA Inspection: INTERNATIONAL AGILE MANUFACTURING, INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of INTERNATIONAL AGILE MANUFACTURING, INC. in 11021 CLITO ROAD, STATESBORO, GA 30458 (NAICS 331511). OSHA activity number 303774574.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTERNATIONAL AGILE MANUFACTURING, INC.
- Site address
- 11021 CLITO ROAD
- City
- STATESBORO
- State
- GA
- ZIP
- 30458
- Mailing
- P.O. BOX 2989, STATESBORO, GA 30458
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331511
- SIC code (legacy)
- 3322
- Employees
- 187
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,375 · Current $550 Reduced
General-duty citation text
P.L. 91-596 Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being crushed by a powered industrial truck in the event of turnover: A) Near Herman motor area - The employer did not ensure that an employee who was operating a Yale Forklift, number 2116, was wearing the seat belt. B) Main aisle by maintenance shop - The employer did not ensure that an employee who was operating a Yale Forklift, number 2117, was wearing the seat belt. C) Main aisle by mold cell - The employer did not ensure that an employee who was operating forklift, number 28, was wearing the seatbelt. Among other methods, one feasible and acceptable method to correct this hazard would be to instruct employees to utilize seatbelts during operation of powered industrial trucks and implement a company disciplinary/enforcement policy to ensure compliance.
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
1910.23 C01
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,375 · Current $550 Reduced
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
1910.157 E03
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $825 · Current $330 Reduced
Recent events (2)
- — I (S) $330.00
- — Z (S) $825.00
1910.157 G01
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $825 · Current $330 Reduced
Recent events (2)
- — I (S) $330.00
- — Z (S) $825.00
1910.178 P01
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,375 · Current $550 Reduced
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
1910.179 L03 I
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,375 · Current $550 Reduced
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
1910.212 A03 II
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,375 · Current $550 Reduced
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
1910.213 H04
- Issued
- Dec 9, 2003
- Abate by
- Dec 12, 2003
- Penalty
- Initial $1,375 · Current $550 Reduced
Recent events (2)
- — I (S) $550.00
- — Z (S) $1375.00
1910.213 O02
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,100 · Current $440 Reduced
Recent events (2)
- — I (S) $440.00
- — Z (S) $1100.00
1910.219 E03 I
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,100 · Current $440 Reduced
Recent events (2)
- — I (S) $440.00
- — Z (S) $1100.00
1910.253 B04 III
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
- Penalty
- Initial $1,100 · Current $440 Reduced
Recent events (2)
- — I (S) $440.00
- — Z (S) $1100.00
1910.242 B
- Issued
- Dec 9, 2003
- Abate by
- Jan 28, 2004
Recent events (2)
- — I (O)
- — Z (O)
More inspections at International Agile Manufacturing, INC.
View International Agile Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331511)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 303774574.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.