SMITHFIELD, NC —
OSHA Inspection: ACE FABRICATION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ACE FABRICATION, INC. in 2880 US 70 BUSINESS WEST, SMITHFIELD, NC 27577 (NAICS 000000). OSHA activity number 303827844.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACE FABRICATION, INC.
- Site address
- 2880 US 70 BUSINESS WEST
- City
- SMITHFIELD
- State
- NC
- ZIP
- 27577
- Mailing
- P. O. BOX 2769, SMITHFIELD, NC 27577
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3559
- Employees
- 12
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
19 citations on file for this inspection.
95012901
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $350 · Current $350
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to contact with electricity and water from bathroom facilities a)Administrative office bathroom- the electric receptacle did not have a Ground Fault Circuit Interrupter (GFCI) installed in the bathroom as required by the National Electric Code, Article 210-8 (b) (1). b)Fabrications shop bathroom- the electric receptacle did not have a Ground Fault Circuit Interrupter installed in the bathroom as required by the National Electric Code, Article 210-8 (b) (1). Among other methods, one feasible and acceptable method to correct this hazard would be to have Ground Fault Circuit Interrupters installed in both bathrooms.
95012901
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $125 · Current $125
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to falling hazards due to no inspection documentation showing equipment serviceability and no operating procedures being on hand. Ref:ANSI B30-1981 Sec.16-1.1.4 and Sec.16-2.1 a)Fabrications shop- The chain hoist had no records of inspections being accomplished. b)Fabrications shop- The chain hoist had no labels displaying operating procedures. Among other methods that are feasible and acceptable to correct these hazards would be to inspect, maintain and label the hoist in accordance with ANSI B30-1981 Sec 16-1.1.4 and Sec. 16-2.1.4
1910.157 E02
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $100 · Current $100
1910.212 A03 II
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $350 · Current $350
1910.212 A01
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.215 A04
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $250 · Current $250
1910.215 B09
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.219 E01 I
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $125 · Current $125
1910.304 F04
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $350 · Current $350
1910.305 B01
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $350 · Current $350
1910.305 B02
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.334 A02 II
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
- Penalty
- Initial $350 · Current $350
1910.305 G02 III
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.37 K02
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.157 C01
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.212 A05
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.212 B
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.303 G01 I
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
1910.305 A04 V
- Issued
- Oct 20, 2000
- Abate by
- Nov 7, 2000
More inspections at ACE Fabrication, INC.
View ACE Fabrication, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 303827844.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.