STATESVILLE, NC ·
OSHA Inspection: BALANCE SYSTEMS DIVISION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BALANCE SYSTEMS DIVISION in 1920 FLINTSTONE DRIVE, STATESVILLE, NC 28677 (NAICS 000000). OSHA activity number 303849269.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BALANCE SYSTEMS DIVISION
- Site address
- 1920 FLINTSTONE DRIVE
- City
- STATESVILLE
- State
- NC
- ZIP
- 28677
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3442
- Employees
- 60
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
15 citations on file for this inspection.
95012901
- Issued
- Jun 20, 2001
- Abate by
- Aug 7, 2001
- Penalty
- Initial $313 · Current $200 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)being struck by the structure should it fail - throughout the facility such as the bed of a trailer located in shipping - monorail crane was not load tested prior to initial use. NOTE:Among other methods, one feasible and acceptable method to correct this hazard is to have all cranes load tested. Reference:ANSI B30.11 - 1980; paragraph 11-2.2.2(a) - Rated Load Test. Prior to initial use, all cranes are to be load tested...
Recent events (2)
- · I (S) $200.00
- · Z (S) $313.00
95012901
- Issued
- Jun 20, 2001
- Abate by
- Aug 7, 2001
- Penalty
- Initial $313 · Current $200 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)being struck by the structure should it fail - throughout the facility, such as the bed of a trailer located in shipping - monorail crane was not inspected prior to initial use. NOTE:Among other methods, one feasible and acceptable method to correct this hazard is to have all cranes inspected initially and at least periodically thereafter. Reference:ANSI B30.11 - 1980; paragraph 11-2.1.1(a) - Inspections. Prior to initial use, all cranes shall be inspected by a qualified person...
Recent events (2)
- · I (S) $200.00
- · Z (S) $313.00
95012901
- Issued
- Jun 20, 2001
- Abate by
- Aug 7, 2001
- Penalty
- Initial $313 · Current $200 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)being struck by objects from failure of the below the hook device - throughout the facility such as the Roll Mill Area - operational tests were not performed on all below the hook lifting devices prior to initial use. NOTE:Among other methods, one feasible and acceptable method to correct this hazard is to have all below the hook lifting devices tested prior to initial use. Reference:ANSI B30.20 - 1985; paragraph 20-1.4.1 - Operational Tests. Prior to initial use, all Below the Hook Lifting Devices shall be tested to ensure compliance...
Recent events (2)
- · I (S) $200.00
- · Z (S) $313.00
1910.219 D01
- Issued
- Jun 20, 2001
- Abate by
- Jul 17, 2001
- Penalty
- Initial $625 · Current $400 Reduced
Recent events (2)
- · I (S) $400.00
- · Z (S) $625.00
1910.219 C03
- Issued
- Jun 20, 2001
- Abate by
- Jul 17, 2001
1910.219 E01 I
- Issued
- Jun 20, 2001
- Abate by
- Jul 17, 2001
1910.219 E03 I
- Issued
- Jun 20, 2001
- Abate by
- Jul 17, 2001
1910.305 B02
- Issued
- Jun 20, 2001
- Abate by
- Jun 28, 2001
- Penalty
- Initial $438 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $438.00
1910.95 B01
- Issued
- Jun 20, 2001
- Abate by
- Aug 7, 2001
- Penalty
- Initial $1,250 · Current $1,000 Reduced
Recent events (2)
- · I (S) $1000.00
- · Z (S) $1250.00
1910.95 C01
- Issued
- Jun 20, 2001
- Abate by
- Aug 7, 2001
1910.22 D01
- Issued
- Jun 20, 2001
- Abate by
- Jun 28, 2001
- Penalty
- Initial $313 · Current $200 Reduced
Recent events (2)
- · I (S) $200.00
- · Z (S) $313.00
1910.147 C07 I
- Issued
- Jun 20, 2001
- Abate by
- Jul 17, 2001
1910.215 A04
- Issued
- Jun 20, 2001
- Abate by
- Jun 25, 2001
1910.305 A01 I
- Issued
- Jun 20, 2001
- Abate by
- Jun 28, 2001
1910.305 G01 III
- Issued
- Jun 20, 2001
- Abate by
- Jun 28, 2001
More inspections at Balance Systems Division
View Balance Systems Division's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 303849269.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.