KINGS MOUNTAIN, NC ·
OSHA Inspection: CAROLINA TEXTILE SALES OF GASTONIA, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CAROLINA TEXTILE SALES OF GASTONIA, INC. in 521 N. SIMS STREET, KINGS MOUNTAIN, NC 28086 (NAICS 000000). OSHA activity number 304282668.
What this inspection record means
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Carolina Textile Sales of Gastonia, INC. for free
Get an email when a new federal OSHA severe-injury report for Carolina Textile Sales of Gastonia, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CAROLINA TEXTILE SALES OF GASTONIA, INC.
- Site address
- 521 N. SIMS STREET
- City
- KINGS MOUNTAIN
- State
- NC
- ZIP
- 28086
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3552
- Employees
- 16
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
21 citations on file for this inspection.
95012901
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
- Penalty
- Initial $175 · Current $117 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; throughout - jib cranes have not been load tested. REFERENCE: ASME B30.11-1998 11-2.2.2 Load test (a) New, reinstalled, repaired and modified equipment should be load tested prior to initial use... NOTE: One acceptable and feasible means of abatement is to have the jib cranes load tested.
Recent events (3)
- · P (S) $117.25
- · I (S) $117.25
- · Z (S) $175.00
95012901
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
- Penalty
- Initial $175 · Current $119 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; throughout - jib cranes have not been inspected on a frequent and periodic basis. REFERENCE: ASME B30.11-1998 11-2.1.1 (a) Prior to initial use, all new, reinstalled, altered, or modified crane and monorail systems shall be inspected..(b) on a frequent and periodic basis. NOTE: One acceptable and feasible means of abatement is to have the jib cranes inspected on a frequent and periodic basis.ic
Recent events (3)
- · P (S) $119.00
- · I (S) $119.00
- · Z (S) $175.00
95012901
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
- Penalty
- Initial $175 · Current $119 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; throughout - below the hook lifting device has not been load tested. REFERENCE: ASME B30.20-1985 20-1.4.2 Load test (a) Prior to initial use, all new, altered, modified, or repaired lifting devices should be tested. NOTE: One acceptable and feasible means of abatement is to have the below the hook lifting devices load tested.
Recent events (3)
- · P (S) $119.00
- · I (S) $119.00
- · Z (S) $175.00
95012901
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
- Penalty
- Initial $175 · Current $119 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; throughout - below the hook lifting device has not been inspected on a frequent and periodic basis. REFERENCE: ASME B30.20-1985 20-1.3.1 (a) Prior to initial use, all new, altered, modified, or repaired lifting devices should be inspected..(b) on a frequent and periodic basis. NOTE: One acceptable and feasible means of abatement is to have the below the hook lifting devices inspected on a frequent and periodic basis.ic
Recent events (3)
- · P (S) $119.00
- · I (S) $119.00
- · Z (S) $175.00
1910.179 K02
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
- Penalty
- Initial $175 · Current $119 Reduced
Recent events (3)
- · P (S) $119.00
- · I (S) $119.00
- · Z (S) $175.00
1910.179 J03
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
Recent events (2)
- · P (S)
- · Z (S)
1910.179 J02
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
Recent events (2)
- · P (S)
- · Z (S)
1910.179 B05
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
Recent events (2)
- · P (S)
- · Z (S)
1910.184 C02
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
1910.184 D
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
1910.215 B09
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
- Penalty
- Initial $125 · Current $94 Reduced
Recent events (2)
- · I (S) $93.75
- · Z (S) $125.00
1910.303 G02 I
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
- Penalty
- Initial $175 · Current $119 Reduced
Recent events (2)
- · I (S) $119.00
- · Z (S) $175.00
1910.304 F04
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
- Penalty
- Initial $175 · Current $119 Reduced
Recent events (2)
- · I (S) $119.00
- · Z (S) $175.00
1904.5 A
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
- Penalty
- Initial $100 · Current $75 Reduced
Recent events (2)
- · I (O) $75.00
- · Z (O) $100.00
1910.23 D01 IV
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
1910.38 A01
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
1910.147 C01
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
Recent events (2)
- · P (O)
- · Z (O)
1910.178 L
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
Recent events (2)
- · P (O)
- · Z (O)
1910.178 P01
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
1910.212 A03 II
- Issued
- Mar 16, 2001
- Abate by
- Apr 18, 2001
1910.1200 E01
- Issued
- Mar 16, 2001
- Abate by
- May 25, 2001
Recent events (2)
- · P (O)
- · Z (O)
More inspections at Carolina Textile Sales of Gastonia, INC.
View Carolina Textile Sales of Gastonia, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
Jan 5, 2012
Bruce D. Bowman · SCHENECTADY, NY
Jan 25, 2005
KGC, INC. · BILLINGS, MT
Dec 31, 2002
Rockaway Borough DPW · ROCKAWAY, NJ
Dec 31, 2002
Harry Brickey DBA a. Brickey Ceiling Company · FOREST CITY, NC
Dec 31, 2002
Sudden Bond Industries · EDGERTON, KS
More inspections in NC
Aug 14, 2026
161744 - Orange County ABC Board - Store #5 · CHAPEL HILL, NC
Aug 14, 2026
161742 - E. G. Construction, Corp. · LAKE PARK, NC
Aug 14, 2026
161741 - NVR, INC. · LAKE PARK, NC
Aug 14, 2026
161740 - Odavi Framing LLC · LAKE PARK, NC
Aug 14, 2026
161738 - Daimler Truck North America LLC · GASTONIA, NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 304282668.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.