HATTIESBURG, MS —
OSHA Inspection: C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC. in 1600 EDWARDS STREET, HATTIESBURG, MS 39401 (NAICS 000000). OSHA activity number 304313596.
Where did this inspection happen?
- Establishment
- C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.
- Site address
- 1600 EDWARDS STREET
- City
- HATTIESBURG
- State
- MS
- ZIP
- 39401
- Mailing
- P.O. BOX 1647, HATTIESBURG, MS 39403
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3321
- Employees
- 75
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
25 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $500.00 · Current $300.00 Reduced
General-duty citation text
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: Hazard of being struck by and/or crushed by materials dropped from defective below the hook lifting devices: (a)Foundry building - Spreader bar on 5 ton P & H underhung single girdle top running gantry crane was not marked with rated load. (b)Foundry loose pattern area - Spreader beam did not have an identification certifying the lifting capacity. (c)Loop bed molding area - Wire rope sling attached to spreader beam were attached with single wire rope U-bolt clip. (d)Grinding department, west side station #1 - Home made lifting prong(s) were used for blow bar(s) # 1044 and #1053. One feasible and useful abatement method to correct this hazard is to: (1) Follow the requirements of American National Standard, ANSI/ASME B30.20 - 1993 for Below The Hook Lifting Devices by posting the rated load capacity, installing the correct number of U-bolt clips and removing home made lifting prongs.
Recent events (2)
- — I (S) $300.00
- — Z (S) $500.00
1910.23 C01
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.147 C04 IIB
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.212 A03 II
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $300.00 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $375.00
1910.212 A05
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.213 H01
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.213 H03
- Issued
- Abate by
1910.213 H04
- Issued
- Abate by
1910.215 A02
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.215 B09
- Issued
- Abate by
1910.219 C02 I
- Issued
- Abate by
- Penalty
- Initial $500.00 · Current $300.00 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $500.00
1910.219 E01 I
- Issued
- Abate by
- Penalty
- Initial $500.00 · Current $300.00 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $500.00
1910.219 I02
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.242 B
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $375.00
Recent events (2)
- — I (S) $375.00
- — Z (S) $375.00
1910.243 C01
- Issued
- Abate by
- Penalty
- Initial $500.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $500.00
1910.304 F05 V
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.305 A02 IIIF
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.305 B02
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.334 A02 II
- Issued
- Abate by
- Penalty
- Initial $375.00 · Current $200.00 Reduced
Recent events (2)
- — I (S) $200.00
- — Z (S) $375.00
1910.22 D01
- Issued
- Abate by
1910.184 E01
- Issued
- Abate by
1910.184 E03 II
- Issued
- Abate by
1910.253 B04 III
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G01 IIIA
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.303 G02 I
- Issued
- Abate by
More inspections at C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.
HATTIESBURG, MS—2002-04-03 00:00:00
C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.
HATTIESBURG, MS—1989-09-27 00:00:00
C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.
HATTIESBURG, MS—1989-07-13 00:00:00
C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.
View C.L. DEWS & SONS FOUNDRY AND MACHINERY CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
SCHENECTADY, NY—2012-01-05 00:00:00
BRUCE D. BOWMAN
BILLINGS, MT—2005-01-25 00:00:00
KGC, INC.
ROCKAWAY, NJ—2002-12-31 00:00:00
ROCKAWAY BOROUGH DPW
FOREST CITY, NC—2002-12-31 00:00:00
HARRY BRICKEY DBA A. BRICKEY CEILING COMPANY
EDGERTON, KS—2002-12-31 00:00:00
SUDDEN BOND INDUSTRIES
More inspections in MS
LAUREL, MS—2026-07-01
THERMO-KOOL
HORN LAKE, MS—2026-07-01
NEWLY WEDS FOODS, INC.
GAUTIER, MS—2026-07-01
DOUBLE R GAUTIER, LLC
OLIVE BRANCH, MS—2026-06-30
HYVE SOLUTIONS
GAUTIER, MS—2026-06-30
STEVE WILSON ENTERPRISE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304313596.