Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: STEPHENS-ADAMSON CONVEYOR COMPONENTS

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of STEPHENS-ADAMSON CONVEYOR COMPONENTS in 1515 DESOTO/HIGHWAY 49 SOUTH, CLARKSDALE, MS 38614 (NAICS 333922). OSHA activity number 304319213.

Watch Stephens-Adamson Conveyor Components — free Get an email when a new federal OSHA severe-injury report for Stephens-Adamson Conveyor Components is published. One employer, no account, unsubscribe in one click.
Site address
1515 DESOTO/HIGHWAY 49 SOUTH
City
CLARKSDALE
State
MS
ZIP
38614
Mailing
P.O. BOX 1310, CLARKSDALE, MS 38614
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Y
Opened
Closing conference
Case closed
Data loaded
NAICS code
333922
SIC code (legacy)
3535
Employees
64
Ownership type
A
Industry flags
Manufacturing safety.

8 citations on file for this inspection.

5(a)(1)

Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $975.00 · Current $488.00 Reduced
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health
Act of 1970:  The
employer did not furnish employment and a place of employment which were
free from
recognized hazards that were causing or likely to cause death or serious
physical harm to
employees, in that employees were exposed to: the hazard of loads being
dropped due to the
absence of rated loads having been determined for "Below-the-Hook" Lifting
Devices, i.e., not
having been conspicuously displayed on the device(s).
(a)Building 3, 6300 Series Seal Press - There were no rated load markings
visible
on the main structure of, nor any identification plates which listed:
a.  the manufacturer's name and address,
b.  the serial number of the device,
c.  the lifter's weight (if over 100 lbs),
d.  its rated load
on the "Below-the-Hook" Lifting Device used to move the Rubber Impact
Return Roller.
[Reference Section 20-1.2.1(a) & (b) of The American Society of Mechanical
Engineers
Safety Standard for Below-the-Hook Lifting Devices, ASME B30.20a-1996].
Among other methods, one feasible and acceptable abatement method to
correct this
hazard is to: (1) stencil a clearly visible load rating on each
"Below-the-Hook" lifting
device, and (2) affix an identification plate to each "Below-the-Hook"
lifting device
which includes the information required in points a-d above.
Recent events (2)
  • — I (S) $488.00
  • — Z (S) $975.00

1910.180 B02

Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $975.00 · Current $488.00 Reduced
Recent events (2)
  • — I (S) $488.00
  • — Z (S) $975.00

1910.180 I05 I

Deleted Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Recent events (2)
  • — I (S)
  • — Z (S)

1910.184 E02 II

Serious Gravity 01 3 instances 1 exposed
Issued
Abate by
Penalty
Initial $975.00 · Current $525.00 Reduced
Recent events (2)
  • — I (S) $525.00
  • — Z (S) $975.00

1910.212 A03 II

Other-than-serious Gravity 01 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $975.00
Recent events (2)
  • — I (O)
  • — Z (S) $975.00

1910.212 A05

Serious Gravity 01 5 instances 4 exposed
Issued
Abate by
Penalty
Initial $975.00 · Current $575.00 Reduced
Recent events (2)
  • — I (S) $575.00
  • — Z (S) $975.00

1910.304 F05 IVC

Serious Gravity 01 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $975.00 · Current $590.00 Reduced
Recent events (2)
  • — I (S) $590.00
  • — Z (S) $975.00

1910.305 G01 IIIA

Serious Gravity 01 4 instances 1 exposed
Issued
Abate by
Penalty
Initial $975.00 · Current $590.00 Reduced
Recent events (2)
  • — I (S) $590.00
  • — Z (S) $975.00

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304319213.