CHICAGO, IL —
OSHA Inspection: CENTRAL METAL STRIP, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CENTRAL METAL STRIP, INC. in 4343 NORTH WESTERN AVENUE, CHICAGO, IL 60618 (NAICS 000000). OSHA activity number 304492945.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL METAL STRIP, INC.
- Site address
- 4343 NORTH WESTERN AVENUE
- City
- CHICAGO
- State
- IL
- ZIP
- 60618
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3444
- Employees
- 8
- Ownership type
- A
Citations
22 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $750 · Current $300 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to laceration/amputation hazards from the rotating saw blade: (a) Tool Room- The Kalamazoo horizontal band saw was not equipped with a magnetic restarter or similar device, as prescribed by the American National Standard for Metal Cutting Saws, ANSI B11.10-1990, Section 5.2.3.4, that in the event of an interruption in the electrical supply, would prevent the saw from restarting automatically when power is restored. (b) Tool Room- The Kalamazoo horizontal band saw was equipped with unprotected, toggle type, motor starter switch instead of starter guarded against unexpected or accidental activation, as prescribed by the American National Standard for Metal Cutting Saws, ANSI B11.10-1990, Section 5.2.3.1. Abatement documentation is required for this item in accordance with 29 CFR 1903.19 paragraph (d).
Recent events (2)
- — I (S) $300.00
- — Z (S) $750.00
1910.22 A01
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $1,050 · Current $390 Reduced
Recent events (2)
- — I (S) $390.00
- — Z (S) $1050.00
1910.176 A
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Jul 11, 2001
- Abate by
- Sep 15, 2002
- Penalty
- Initial $750 · Current $300 Reduced
Recent events (3)
- — P (S) $300.00
- — I (S) $300.00
- — Z (S) $750.00
1910.213 B03
- Issued
- Jul 11, 2001
- Abate by
- Oct 1, 2001
- Penalty
- Initial $750 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $750.00
1910.219 F03
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $600 · Current $220 Reduced
Recent events (2)
- — I (S) $220.00
- — Z (S) $600.00
1910.303 B02
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $450 · Current $180 Reduced
Recent events (2)
- — I (S) $180.00
- — Z (S) $450.00
1910.303 G02 I
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $600 · Current $220 Reduced
Recent events (2)
- — I (S) $220.00
- — Z (S) $600.00
1910.305 B02
- Issued
- Jul 11, 2001
- Abate by
- Jul 16, 2001
- Penalty
- Initial $600 · Current $220 Reduced
Recent events (2)
- — I (S) $220.00
- — Z (S) $600.00
1910.334 A02 I
- Issued
- Jul 11, 2001
- Abate by
- Jul 16, 2001
- Penalty
- Initial $382 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $382.00
1910.147 C05 I
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $5,500 · Current $2,170 Reduced
Recent events (2)
- — I (W) $2170.00
- — Z (W) $5500.00
1910.147 D04 I
- Issued
- Jul 11, 2001
- Abate by
- Oct 1, 2001
Recent events (2)
- — I (W)
- — Z (W)
1910.212 A01
- Issued
- Jul 11, 2001
- Abate by
- Oct 1, 2001
- Penalty
- Initial $5,500 · Current $2,170 Reduced
Recent events (2)
- — I (W) $2170.00
- — Z (W) $5500.00
1910.212 A03 II
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $5,500 · Current $2,170 Reduced
Recent events (2)
- — I (W) $2170.00
- — Z (W) $5500.00
1910.217 C01 I
- Issued
- Jul 11, 2001
- Abate by
- Sep 15, 2002
Recent events (3)
- — P (W)
- — I (W)
- — Z (W)
1910.217 C02 IA
- Issued
- Jul 11, 2001
- Abate by
- Feb 1, 2002
Recent events (3)
- — P (W)
- — I (W)
- — Z (W)
1910.219 D01
- Issued
- Jul 11, 2001
- Abate by
- Oct 1, 2001
- Penalty
- Initial $5,500 · Current $2,170 Reduced
Recent events (2)
- — I (W) $2170.00
- — Z (W) $5500.00
1910.219 E03 I
- Issued
- Jul 11, 2001
- Abate by
- Oct 1, 2001
Recent events (2)
- — I (W)
- — Z (W)
1910.217 E01 I
- Issued
- Jul 11, 2001
- Abate by
- Oct 1, 2001
Recent events (2)
- — I (O)
- — Z (O)
1910.305 B01
- Issued
- Jul 11, 2001
- Abate by
- Jul 16, 2001
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 II
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 III
- Issued
- Jul 11, 2001
- Abate by
- Aug 13, 2001
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Central Metal Strip, INC.
View Central Metal Strip, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304492945.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.