GASTONIA, NC —
OSHA Inspection: HAM BROTHERS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HAM BROTHERS, INC. in 205 SHAMROCK ROAD, GASTONIA, NC 28056 (NAICS 000000). OSHA activity number 304516305.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HAM BROTHERS, INC.
- Site address
- 205 SHAMROCK ROAD
- City
- GASTONIA
- State
- NC
- ZIP
- 28056
- Mailing
- P.O. BOX 407, MOUNT HOLLY, NC 28120
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3444
- Employees
- 13
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
16 citations on file for this inspection.
95012901
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; shop - monorail system has not been load tested. b)facility; shipping - underhung crane systems have not been load tested. REFERENCE: ANSI B30.11-1998; 11-2.2.2 Load Test (a) New, reinstalled, altered, repaired, and modified equipment should be load tested... NOTE: One acceptable and feasible means of abatement is to have the crane systems load tested.
95012901
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; shop - monorail system has not been inspected on a frequent basis. b)facility; shipping - underhung crane systems have not been inspected on a frequent basis. REFERENCE: ANSI B30.11-1998; 11-2.1.1 Inspection (a) Prior to initial use, all New, reinstalled, altered, or modified crane and monorail systems shall be inspected...(b) on a frequent basis. NOTE: One acceptable and feasible means of abatement is to have the crane systems inspected on a frequent basis.nt
95012901
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; shop - below the hook lifting device has not been load tested. REFERENCE: ANSI B30.20-1985; 20-1.4.2 Rated Load Test (a) Prior to initial use, all new, altered, modified, or repaired lifting devices should be tested... NOTE: One acceptable and feasible means of abatement is to have the below the hook lifting device load tested.
95012901
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; shop - below the hook lifting device has not been inspected on a frequent and periodic basis. REFERENCE: ANSI B30.20-1985; 20-1.3.1 Inspection (a) Prior to initial use, all new, altered, modified, or repaired lifting devices shall be inspected...(b) on a frequent and periodic basis. NOTE: One acceptable and feasible means of abatement is to have the below the hook lifting device inspected on a frequent and periodic basis..c
1910.23 C01
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
1910.212 A03 II
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
1910.213 I01
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
1910.305 B01
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
- Penalty
- Initial $100 · Current $100
1910.147 C04 I
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.147 C07 I
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.157 G01
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.213 H04
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.253 B02 II
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.304 F04
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.305 G02 III
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
1910.1200 H
- Issued
- Jun 25, 2001
- Abate by
- Aug 13, 2001
More inspections at HAM Brothers, INC.
View HAM Brothers, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304516305.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.