WINCHESTER, VA —
OSHA Inspection: MIDWESCO FILTER RESOURCES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIDWESCO FILTER RESOURCES in 400 BATTAILE DR., WINCHESTER, VA 22601 (NAICS 000000). OSHA activity number 304540503.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIDWESCO FILTER RESOURCES
- Site address
- 400 BATTAILE DR.
- City
- WINCHESTER
- State
- VA
- ZIP
- 22601
- Mailing
- 385 BATTAILE DR., WINCHESTER, VA 22601
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3564
- Employees
- 125
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
21 citations on file for this inspection.
510001 A
- Issued
- Nov 20, 2001
- Abate by
- Jan 17, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
40.1-51.1(a) of the Code of Virginia: Midwesco Filter Resources, Inc., did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees are operating two Harrington 1/2 Ton Peerless electric chain hoists in the Lay-Cut and Slitter Areas, which exposes them to: (a) Contusions by not having the latches securely attached to the hooks of both hoists. The safety latches have been taped back to the hooks preventing them from closing. One feasible and acceptable abatement method, among other methods, would be to place new latches on the hooks such as that called for by ANSI 30.16(b) 1990, American National Standard Safety Code for Overhead Hoists. (b) Electric shock by not having strain relief on the electrical cord to the pendant control box of the hoist located in the Lay-Cut Area. The cord has broken away from the box exposing wires. One feasible and acceptable abatement method, among other methods, would be to place a new electrical cord on the pendent control box such as that called for by ANSI 30.16(b) 1990, American National Standard Safety Code for Overhead Hoists. (c) Contusions by not having the maximum load capacity posted on the traveling beam for the hoist located in the Lay-Cut Area. One feasible and acceptable abatement method, among other methods, would be post "1/2 Ton" on the beam such as that called for by ANSI 30.16(b) 1990, American National Standard Safety Code for Overhead Hoists. (d) Contusions by not performing documented periodic inspections (annual) for both hoists. One feasible and acceptable abatement method, among other methods, would be to conduct annual inspections (documented) of all components for both hoists, such as that called for by ANSI 30.16(b) 1990, American National Standard Safety Code for Overhead Hoists.d
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.133 A01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.147 C01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,600 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1600.00
1910.147 C04 I
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.147 C06 I
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.147 C07 I
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.157 G01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.157 G02
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.176 A
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.176 B
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.212 A01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $2,000 · Current $1,880 Reduced
Recent events (2)
- — I (S) $1880.00
- — Z (S) $2000.00
1910.212 A03 II
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.213 C01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.215 A04
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.215 B09
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.252 B02 III
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
- Penalty
- Initial $1,200 · Current $840 Reduced
Recent events (2)
- — I (S) $840.00
- — Z (S) $1200.00
1910.22 D01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.37 Q01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.157 C01
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.303 B02
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
1910.303 E
- Issued
- Nov 20, 2001
- Abate by
- Jan 9, 2002
More inspections at Midwesco Filter Resources
View Midwesco Filter Resources's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in VA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304540503.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.