MT. PROSPECT, IL —
OSHA Inspection: JENCO METAL PRODUCTS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JENCO METAL PRODUCTS, INC. in 1690 W. IMPERIAL COURT, MT. PROSPECT, IL 60056 (NAICS 000000). OSHA activity number 304585102.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JENCO METAL PRODUCTS, INC.
- Site address
- 1690 W. IMPERIAL COURT
- City
- MT. PROSPECT
- State
- IL
- ZIP
- 60056
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3499
- Employees
- 18
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 10, 2001
- Abate by
- Aug 17, 2001
- Penalty
- Initial $375 · Current $150 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of lacerations/amputations: (a) The Grob Brothers band saw was not equipped with magnetic restart or similar devices, as prescribed by the American National Standard for Metal Cutting Saws, ANSI B11.10-1990, that in the event of an interruption in the electrical supply would prevent the saw from restarting automatically when power is restored. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $150.00
- — Z (S) $375.00
1910.212 A01
- Issued
- Jul 10, 2001
- Abate by
- Aug 24, 2001
- Penalty
- Initial $300 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $300.00
1910.212 A03 II
- Issued
- Jul 10, 2001
- Abate by
- Sep 5, 2001
- Penalty
- Initial $375 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $375.00
1910.217 C02 ID
- Issued
- Jul 10, 2001
- Abate by
- Aug 24, 2001
- Penalty
- Initial $375 · Current $125 Reduced
Recent events (2)
- — I (S) $125.00
- — Z (S) $375.00
1910.243 C04
- Issued
- Jul 10, 2001
- Abate by
- Jul 16, 2001
- Penalty
- Initial $375 · Current $125 Reduced
Recent events (2)
- — I (S) $125.00
- — Z (S) $375.00
1910.303 B02
- Issued
- Jul 10, 2001
- Abate by
- Jul 24, 2001
- Penalty
- Initial $300 · Current $140 Reduced
Recent events (2)
- — I (S) $140.00
- — Z (S) $300.00
1910.147 C01
- Issued
- Jul 10, 2001
- Abate by
- Aug 24, 2001
1910.217 B07 III
- Issued
- Jul 10, 2001
- Abate by
- Aug 2, 2001
1910.217 D09 I
- Issued
- Jul 10, 2001
- Abate by
- Aug 24, 2001
1910.217 E01 I
- Issued
- Jul 10, 2001
- Abate by
- Aug 24, 2001
More inspections at Jenco Metal Products, INC.
View Jenco Metal Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304585102.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.