DALLAS, NC ·
OSHA Inspection: GIBSON MACHINE COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GIBSON MACHINE COMPANY in 3626 DALLAS HIGH SHOALS ROAD, DALLAS, NC 28034 (NAICS 000000). OSHA activity number 304673932.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GIBSON MACHINE COMPANY
- Site address
- 3626 DALLAS HIGH SHOALS ROAD
- City
- DALLAS
- State
- NC
- ZIP
- 28034
- Mailing
- P.O. BOX 2226, GASTONIA, NC 28034
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3544
- Employees
- 31
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
17 citations on file for this inspection.
95012901
- Issued
- Jul 31, 2001
- Abate by
- Oct 19, 2001
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; throughout such as saw dept. - monorail and jib crane systems have not been load tested. REFERENCE: ANSI B30.11-1998;11-2.2.2 Load Test (a) New, reinstalled, altered, repaired, and modified equipment should be load tested... NOTE: One acceptable and feasible means of abatement is to have the monorail and jib cranes load tested.
Recent events (2)
- · P (S) $100.00
- · Z (S) $100.00
95012901
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
- Penalty
- Initial $100 · Current $100
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)facility; throughout such as saw dept. - monorail and jib crane systems have not had frequent and periodic inspection. REFERENCE: ANSI B30.11-1998;11-2.1.1 Inspection (a) Prior to initial use, all new reinstalled, altered, or modified crane and monorail systems shall be inspected...on a frequent and periodic basis. NOTE: One acceptable and feasible means of abatement is to have the monorail and jib cranes inspected on a frequent and periodic basis.ic
1910.151 C
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
- Penalty
- Initial $100 · Current $100
1910.179 K02
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
- Penalty
- Initial $100 · Current $100
1910.179 J01 I
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.184 C01
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.184 D
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.215 B09
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
- Penalty
- Initial $100 · Current $100
1910.304 F05 V
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
- Penalty
- Initial $100 · Current $100
1910.23 D01 III
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.107 B05 IV
- Issued
- Jul 31, 2001
- Abate by
- Oct 19, 2001
Recent events (2)
- · P (O)
- · Z (O)
1910.107 E02
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.147 C04 I
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.212 A05
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.1030 F02 I
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.1030 G02 I
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
1910.1200 H
- Issued
- Jul 31, 2001
- Abate by
- Sep 17, 2001
More inspections at Gibson Machine Company
View Gibson Machine Company's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 304673932.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.