BALTIMORE, MD —
OSHA Inspection: FABRICATORS STEEL AND MANUFACTURING CORPORATION
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of FABRICATORS STEEL AND MANUFACTURING CORPORATION in 1671 SOUTH HIGHLAND AVENUE, BALTIMORE, MD 21224 (NAICS 000000). OSHA activity number 304710353.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FABRICATORS STEEL AND MANUFACTURING CORPORATION
- Site address
- 1671 SOUTH HIGHLAND AVENUE
- City
- BALTIMORE
- State
- MD
- ZIP
- 21224
- Mailing
- P.O.BOX 25888 1671 SOUTH HIGHLAND AVENUE, BALTIMORE, MD 21224
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3411
- Employees
- 50
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
33 citations on file for this inspection.
50104 A
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
- Penalty
- Initial $1,375 · Current $1,375
General-duty citation text
Labor and Employment Article, Section 5-104(a): Annotated Code of Maryland: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a)Date of Violation:10/02/01 Location:Carpenter Building Condition:A polyvinyl chloride (PVC) pipe was used to transport compressed air to one shear and two press brake machines at 145 p.s.i. Among others, one feasible and acceptable abatement method to correct this hazard would be to encase the PVC pipes in a shatter-resistant conduit (preferably metal or ABS material) of sufficient strength to provide protection from external damage and deterioration. The PVC pipe can also be completely replaced if this proves to be more economically feasible. Abatement documentation (photographs, receipts, copies of programs, training certification, etc.) is required for this item.
1910.95 D01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
- Penalty
- Initial $1,650 · Current $1,650
1910.95 G01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.95 K01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.107 B10
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
- Penalty
- Initial $1,650 · Current $1,650
1910.107 F01
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
1910.107 G02
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
1910.132 F01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
- Penalty
- Initial $1,375 · Current $1,375
1910.134 C01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
- Penalty
- Initial $1,375 · Current $1,375
1910.134 E01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.106 E02 IIB2
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
- Penalty
- Initial $1,650 · Current $1,650
1910.157 G01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
- Penalty
- Initial $1,375 · Current $1,375
1910.178 C02 III
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
- Penalty
- Initial $1,650 · Current $1,650
1910.307 B
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
- Penalty
- Initial $1,650 · Current $1,650
1910.1200 H01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
- Penalty
- Initial $1,375 · Current $1,375
50405 B01
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
50406 A01
- Issued
- Dec 27, 2001
- Abate by
- Jan 14, 2002
1910.95 L01
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
1910.107 B09
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
1910.107 B05 I
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.132 D02
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
1910.132 F04
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.134 C03
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.134 D03 IIIB2
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.134 F02
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.134 G01 II
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
1910.134 G01 III
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.134 K01
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.146 C05 IE
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.178 A06
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
1910.253 A03
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
09122102 A
- Issued
- Dec 27, 2001
- Abate by
- Jan 29, 2002
09122303 B
- Issued
- Dec 27, 2001
- Abate by
- Jan 2, 2002
More inspections in this industry (NAICS 000000)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304710353.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.