CHICAGO, IL ·
OSHA Inspection: WINDY CITY MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WINDY CITY MANUFACTURING, INC. in 1855 N. LECLAIRE, CHICAGO, IL 60639 (NAICS 000000). OSHA activity number 304710627.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WINDY CITY MANUFACTURING, INC.
- Site address
- 1855 N. LECLAIRE
- City
- CHICAGO
- State
- IL
- ZIP
- 60639
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3229
- Employees
- 3
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 18, 2001
- Abate by
- Nov 1, 2001
- Penalty
- Initial $600 · Current $300 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Second floor - the Craftsman table saw used for metal was not equipped with a magnetic restarter or equivalent device as prescribed in NFPA-79, National Fire Protection Association, Electrical Standard for Industrial Machinery, that in the event of an interruption in the electrical supply would prevent the saw from restarting automatically when power is restored. The saw was also equipped with an unprotected, toggle-type, motor starter switch instead of a starter located, designed, constructed, interlocked, or guarded to protect against unintended operation. Abatement certification only is required for this item in accordance with the requirements of 29 CFR 1903.19(c).s
Recent events (2)
- · I (S) $300.00
- · Z (S) $600.00
1910.212 A03 II
- Issued
- Sep 18, 2001
- Abate by
- Nov 1, 2001
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- · I (S) $450.00
- · Z (S) $750.00
1910.217 C01 I
- Issued
- Sep 18, 2001
- Abate by
- Nov 1, 2001
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- · I (S) $300.00
- · Z (S) $600.00
1910.219 B01
- Issued
- Sep 18, 2001
- Abate by
- Nov 15, 2001
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.219 D01
- Issued
- Sep 18, 2001
- Abate by
- Nov 15, 2001
Recent events (2)
- · I (S)
- · Z (S)
1910.305 G01 III
- Issued
- Sep 18, 2001
- Abate by
- Nov 1, 2001
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- · I (S) $225.00
- · Z (S) $450.00
1910.334 A02 I
- Issued
- Sep 18, 2001
- Abate by
- Nov 1, 2001
Recent events (2)
- · I (S)
- · Z (S)
More inspections at Windy City Manufacturing, INC.
View Windy City Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304710627.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.