Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CYCLONE DRILLING, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CYCLONE DRILLING, INC. in DRILL RIG # 1 RWF 334-29, PARACHUTE, CO 81635 (NAICS 213111). OSHA activity number 304983554.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cyclone Drilling, INC. — free Get an email when a new federal OSHA severe-injury report for Cyclone Drilling, INC. is published. One employer, no account, unsubscribe in one click.
Site address
DRILL RIG # 1 RWF 334-29
City
PARACHUTE
State
CO
ZIP
81635
Mailing
5800 MOHAN ROAD, GILLETTE, WY 82718
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
213111
SIC code (legacy)
1381
Employees
22
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 3 exposed
Issued
Jun 5, 2003
Abate by
Jul 8, 2003
Penalty
Initial $5,000 · Current $5,000
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not
furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to the hazard of being struck by manual tongs that
were deteriorated
and not kept in safe operating condition.
(a)Cyclone Drilling & Drill #5, Piceance Creek, Meeker, CO: On or before
January 02, 2003, the employer did not perform on-the-job training and
adequately instruct each employee in safe working practices and the
recognition and avoidance of unsafe condition associated with gas well
drilling
operations. An untrained employee, who was involved in gas well drilling
operations, sustained a severe blow to the head when the upper tong latch
slipped out of the tong head jaws.
Among other methods, one feasible and acceptable abatement method to
correct the hazard
is to implement an effective safety program.  Such safety training
programs should include,
but is not limited to the following: Instruction of the driller's or crew
chief's responsibility
for the safety of the crew and equipment during normal operations and
possible emergencies.
Indoctrination of new personnel. New rig personnel, regardless of prior
experience, should
have the job outlined, explained, and demonstrated by the driller, crew
chief, or another
designated crew member. Observation of new personnel work performance
should be
maintained until the applicable supervisor is satisfied that the personnel
can fill the position
in a safe and effective manner. Instruction of crew members on work
procedures and safe
practices should be given.  This is required by American Petroleum
Institute, API
Recommended Practice 54 1999, Section 6, Sub-Section 6.1, Paragraph 6.1.7
a-g, page 9.
Abatement Note: Abatement certification and documentation are required for
this item (see
enclosed "Sample Abatement Certification Letter").
Recent events (2)
  • — I (S) $5000.00
  • — Z (S) $5000.00

1910.23 D01 II

Serious Gravity 01 1 instance 3 exposed
Issued
Jun 5, 2003
Abate by
Jul 17, 2003
Penalty
Initial $1,275 · Current $956 Reduced
Recent events (2)
  • — I (S) $956.00
  • — Z (S) $1275.00

1910.212 A05

Serious Gravity 03 1 instance 3 exposed
Issued
Jun 5, 2003
Abate by
Jul 8, 2003
Penalty
Initial $2,125 · Current $1,381 Reduced
Recent events (2)
  • — I (S) $1381.00
  • — Z (S) $2125.00

1910.242 A

Other-than-serious Gravity 10 1 instance 3 exposed
Issued
Jun 5, 2003
Abate by
Jul 17, 2003
Penalty
Initial $5,000 · Current $100 Reduced
Recent events (2)
  • — I (O) $100.00
  • — Z (S) $5000.00

View Cyclone Drilling, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304983554.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.