KENYON, RI —
OSHA Inspection: KENYON INDUSTRIES INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KENYON INDUSTRIES INC in 36 SHERMAN AVENUE, KENYON, RI 02836 (NAICS 313311). OSHA activity number 304992845.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KENYON INDUSTRIES INC
- Site address
- 36 SHERMAN AVENUE
- City
- KENYON
- State
- RI
- ZIP
- 02836
- Mailing
- P.O. BOX 115, SHANNOCK, RI 02875
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313311
- SIC code (legacy)
- 2262
- Employees
- 325
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 12, 2003
- Abate by
- Feb 17, 2004
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing and fall hazards at the three (3) material lifts (rams), as follows: a.Establishment: At all three (3) material lifts (two down rams and one up ram) employees were able to access the upper shaft areas, exposing themselves to falls of approximately 20 feet. The employees were exposed to fall hazards when opening the ram doors, loading rolls of material, or checking on that status of the rolls of fabric in the shaft below. Employees were also able to access the lower shaft areas of all three lifts (rams), exposing themselves to the hazards of being struck by and/or caught between the moving platform or forks. Employees were also exposed to the hazard of being struck by moving rolls of materials. Feasible and useful methods to correct these hazards, among other methods, are the installation of gates or other devices with interlocking mechanisms, that would prevent the employees from accessing the shaft from above and below. Also provide training and instruction to employees using these rams on the dangers of entering the shafts. In addition, it is recommended that the employer assure compliance with state and local ordinances, as well as ANSI/ASME A17.1, The American National Safety Code for Elevators, Dumbwaiters, and Moving Walks.
Recent events (2)
- — I (S) $2250.00
- — Z (S) $4500.00
1910.212 A01
- Issued
- Sep 12, 2003
- Abate by
- Dec 16, 2003
- Penalty
- Initial $1,300 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1300.00
1910.303 B01
- Issued
- Sep 12, 2003
- Abate by
- Sep 17, 2003
- Penalty
- Initial $828 · Current $414 Reduced
Recent events (2)
- — I (S) $414.00
- — Z (S) $828.00
1910.303 F
- Issued
- Sep 12, 2003
- Abate by
- Sep 22, 2003
1910.101 B
- Issued
- Sep 12, 2003
- Abate by
- Sep 17, 2003
1910.151 C
- Issued
- Sep 12, 2003
- Abate by
- Sep 17, 2003
More inspections at Kenyon Industries INC
View Kenyon Industries INC's full OSHA safety record →
More inspections in this industry (NAICS 313311)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304992845.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.