ALLENTOWN, PA —
OSHA Inspection: LIBERTY RECYCLING
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LIBERTY RECYCLING in 526 N. 3RD STREET, ALLENTOWN, PA 18103 (NAICS 000000). OSHA activity number 305014425.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIBERTY RECYCLING
- Site address
- 526 N. 3RD STREET
- City
- ALLENTOWN
- State
- PA
- ZIP
- 18103
- Mailing
- P.O. BOX 1014, ALLENTOWN, PA 18105
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 4953
- Employees
- 18
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 3, 2002
- Abate by
- Jan 5, 2003
- Penalty
- Initial $750 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazard of tripping, falling and crushing: a) Conveyor Area - The employees are walking on a moving conveyor belt to sort and remove refuse from the material to be compacted on or about 8/6/02. b) Conveyor Area - Employees walk on the moving conveyor and the conveyor was not provided with an emergency stopping device. If the employee falls they would be pulled into the compactor on or about 8/6/02. c) Conveyor Area - Employees were not trained how to operate the conveyor on or about 8/6/02. d) Conveyor Area - No audible alarm was supplied to let employees know that the conveyors are starting on or about 8/6/02. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: a) Enforce the ANSI B20.1-1987, section 5.12(d) safe operating procedures prohibiting employees from walking /working on moving belts; b) Enforce the ANSI B20.1-1987, section 5.11.2(c) Controls, shall be furnished with emergency stop buttons, pull cords, limit switches, or similar emergency stop devices; c) Enforce the ANSI B20.1-1987, section 5.12 Operation, Only a trained person shall be permitted to operate a conveyor; and d) Enforce the ANSI B20.1-1987, section 5.11(b)(1) Controls, When a conveyor that would cause injury when started, an audible device shall be provided that can be clearly heard at all points along the conveyor. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.22 A01
- Issued
- Oct 3, 2002
- Abate by
- Oct 8, 2002
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
1910.37 F01
- Issued
- Oct 3, 2002
- Abate by
- Oct 8, 2002
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $600.00
1910.147 C04 I
- Issued
- Oct 3, 2002
- Abate by
- Oct 8, 2002
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $600.00
1910.147 C06 I
- Issued
- Oct 3, 2002
- Abate by
- Oct 8, 2002
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- Oct 3, 2002
- Abate by
- Oct 8, 2002
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Oct 3, 2002
- Abate by
- Jan 5, 2003
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.253 B04 III
- Issued
- Oct 3, 2002
- Abate by
- Oct 21, 2002
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
More inspections at Liberty Recycling
View Liberty Recycling's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305014425.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.