THOMASVILLE, NC ·
OSHA Inspection: THOMASVILLE VENEER COMPANY
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of THOMASVILLE VENEER COMPANY in 521 BROAD STEEET, THOMASVILLE, NC 27360 (NAICS 000000). OSHA activity number 305081028.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THOMASVILLE VENEER COMPANY
- Site address
- 521 BROAD STEEET
- City
- THOMASVILLE
- State
- NC
- ZIP
- 27360
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2435
- Employees
- 35
- Ownership type
- Private (A)
- Industry flags
- Manufacturing health.
Citations
21 citations on file for this inspection.
95012901
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
- Penalty
- Initial $300 · Current $100 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to falling logs following equipment failure: a)manufacturing area, an adequate Frequent Inspection (i.e. monthly) procedure was not conducted of the Budgit 2-ton hoist. Reference 16-2.1.2 ANSI B30.16-1981 Overhead Hoists. b)manufacturing area, an adequate Periodic Inspection (i.e. yearly) procedure was not conducted of the Budgit 2-ton hoist. Reference 16-2.1.3 ANSI B30.16-1981 Overhead Hoists. c)manufacturing area, the hook on the Budgit 2 ton hoist was not equipped with a safety latch. Reference 16-1.2.9 ANSI B30.16-1981 Overhead Hoists. Note: Among other methods, one feasible and acceptable method to correct this hazard would be to establish an inspection process that incorporated these requirements as well as any other recognized industry standard relating to overhead hoists.d
Recent events (2)
- · I (S) $100.00
- · Z (S) $300.00
1910.151 C
- Issued
- Jan 25, 2002
- Abate by
- Jan 31, 2002
- Penalty
- Initial $300 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $300.00
1910.133 A01
- Issued
- Jan 25, 2002
- Abate by
- Feb 2, 2002
1910.138 A
- Issued
- Jan 25, 2002
- Abate by
- Jan 31, 2002
1910.212 A03 II
- Issued
- Jan 25, 2002
- Abate by
- Mar 15, 2002
- Penalty
- Initial $700 · Current $700
Recent events (2)
- · I (S) $700.00
- · Z (S) $700.00
1910.219 C04 I
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.266 D01 IV
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
- Penalty
- Initial $250 · Current $250
Recent events (2)
- · I (S) $250.00
- · Z (S) $250.00
1910.1200 E01
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
- Penalty
- Initial $300 · Current $100 Reduced
Recent events (2)
- · I (S) $100.00
- · Z (S) $300.00
1910.1200 F05 I
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.1200 H
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1904.2 A
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.38 A01
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.132 D02
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.134 C02 I
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.134 C02 II
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.157 C01
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.178 Q07
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.303 B02
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.305 G02 III
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.1048 N02 I
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
1910.1048 D02
- Issued
- Jan 25, 2002
- Abate by
- Feb 7, 2002
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 305081028.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.