WINSTON SALEM, NC —
OSHA Inspection: UNICON CONCRETE, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UNICON CONCRETE, LLC in 2439 W. CLEMMONSVILLE ROAD, WINSTON SALEM, NC 27127 (NAICS 000000). OSHA activity number 305090219.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNICON CONCRETE, LLC
- Site address
- 2439 W. CLEMMONSVILLE ROAD
- City
- WINSTON SALEM
- State
- NC
- ZIP
- 27127
- Mailing
- 2439 W. CLEMMONSVILLE ROAD, WINSTON-SALEM, NC 27127
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3273
- Employees
- 15
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
15 citations on file for this inspection.
95012901
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
- Penalty
- Initial $1,925 · Current $1,300 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a.Establishment, yard area - Operator of the DEERE Front End Loader, Model 544H was observed while operating the Loader while not wearing the seat belts that were provided by the manufacturer of the equipment. Among other methods, one feasible and acceptable abatement method to correct this hazard was to require the operator to wear the installed seat belts while operating the front end loader. (References: 1) OSHA Standard Interpretations 07/28/1997, Standard Number 1910.178 (copy attached); 2) ASME/ANSI B56.1a-1989, Addenda to ASME/ANSI B56.1-1988, and ASME B56.1-1993 - Safety Standard for Low Lift and High Lift Trucks).
Recent events (2)
- — I (S) $1300.00
- — Z (S) $1925.00
1910.23 C01
- Issued
- Apr 17, 2002
- Abate by
- Jun 4, 2002
- Penalty
- Initial $688 · Current $480 Reduced
Recent events (2)
- — I (S) $480.00
- — Z (S) $688.00
1910.23 D01 III
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.106 D07 III
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.147 C05 II
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.147 C05 II
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.147 C06 II
- Issued
- Apr 17, 2002
- Abate by
- Jun 4, 2002
1910.157 C01
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.157 E03
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.157 G02
- Issued
- Apr 17, 2002
- Abate by
- Jun 4, 2002
1910.212 B
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.305 B01
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.305 B02
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.305 B02
- Issued
- Apr 17, 2002
- Abate by
- Apr 22, 2002
1910.305 G01 III
- Issued
- Apr 17, 2002
- Abate by
- Jun 4, 2002
More inspections at Unicon Concrete, LLC
View Unicon Concrete, LLC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305090219.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.