BENSENVILLE, IL ·
OSHA Inspection: S & D PRODUCTS, INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of S & D PRODUCTS, INC in 241 E. HILLSIDE DRIVE, BENSENVILLE, IL 60106 (NAICS 000000). OSHA activity number 305156051.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- S & D PRODUCTS, INC
- Site address
- 241 E. HILLSIDE DRIVE
- City
- BENSENVILLE
- State
- IL
- ZIP
- 60106
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3429
- Employees
- 58
- Ownership type
- Private (A)
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 17, 2003
- Abate by
- Jan 23, 2003
- Penalty
- Initial $875 · Current $400 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards, that were likely to cause death or serious physical harm to employees, in that employees were exposed to being struck by unsecured loads from company-fabricated lifting devices which have failed as a result of over-loading: On or about October 3, 2002, employees in the Hinge Room at S & D Products, Inc., were using company-fabricated lifting devices to lift metal coils. The lifts were not load- rated nor were they tested to ensure that they were capable of safely lifting the load. A feasible form of abatement would be to comply with ANSI Standard, ASME B30.20b- 1996, Below-The-Hook Lifting Devices. CERTIFICATION REQUIRED FOR THIS ITEM.
Recent events (2)
- · I (S) $400.00
- · Z (S) $875.00
1910.95 C01
- Issued
- Jan 17, 2003
- Abate by
- Feb 19, 2003
- Penalty
- Initial $2,500 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2500.00
1910.212 A01
- Issued
- Jan 17, 2003
- Abate by
- Feb 19, 2003
- Penalty
- Initial $2,500 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2500.00
1910.212 A03 II
- Issued
- Jan 17, 2003
- Abate by
- Feb 19, 2003
Recent events (2)
- · I (S)
- · Z (S)
1910.217 B07 VA
- Issued
- Jan 17, 2003
- Abate by
- Jan 23, 2003
- Penalty
- Initial $2,500 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2500.00
1910.217 C01 I
- Issued
- Jan 17, 2003
- Abate by
- Feb 19, 2003
- Penalty
- Initial $2,500 · Current $1,200 Reduced
Recent events (2)
- · I (S) $1200.00
- · Z (S) $2500.00
1910.303 G01 I
- Issued
- Jan 17, 2003
- Abate by
- Jan 23, 2003
- Penalty
- Initial $1,000 · Current $400 Reduced
Recent events (2)
- · I (S) $400.00
- · Z (S) $1000.00
1910.335 A01 I
- Issued
- Jan 17, 2003
- Abate by
- Jan 23, 2003
- Penalty
- Initial $1,000 · Current $400 Reduced
Recent events (2)
- · I (S) $400.00
- · Z (S) $1000.00
More inspections at S & D Products, INC
View S & D Products, INC's full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 305156051.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.