ADDISON, IL —
OSHA Inspection: TRANS-SHAPE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TRANS-SHAPE, INC. in 250 GERRI LANE, ADDISON, IL 60101 (NAICS 326199). OSHA activity number 305159485.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRANS-SHAPE, INC.
- Site address
- 250 GERRI LANE
- City
- ADDISON
- State
- IL
- ZIP
- 60101
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 30
- Ownership type
- A
Citations
22 citations on file for this inspection.
5(a)(1)
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $1,000 · Current $1,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish a place of employment which was free from recognized hazards that were likely to cause death or serious physical harm to employees in that heated machine frames and components were not insulated or otherwise guarded from employee contact. a)Building 250, Unit 12 Thermoforming Machine - Rear portion of the thermoforming machine was not guarded or insulated to protect employees from burn hazards. During the operation of the machine, heat transfers to the frame of the machine creating burn and fire hazards. b)Building 240, Sterling Sheet Extruder - Die portion on the extruder was not guarded or insulated to protect employees from burn hazards. Among feasible means of abatement would be to comply with the American National Standards Institute, ANSI B11.7-1982 Standard for Machine Tools - Horizontal Hydraulic Extrusion Presses - Safety Requirements for Construction, Care, and Use and; 1) Guard or insulate the heated portions of the machines to prevent employee burns and/or fires. CERTIFICATION REQUIRED FOR THIS ITEM
Recent events (3)
- — A (S) $1000.00
- — I (S) $550.00
- — Z (S) $1000.00
1910.22 A02
- Issued
- May 1, 2003
- Abate by
- May 31, 2003
- Penalty
- Initial $1,000 · Current $1,000
Recent events (3)
- — A (S) $1000.00
- — I (S) $550.00
- — Z (S) $1000.00
1910.36 D01
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $1,250 · Current $1,250
Recent events (3)
- — A (S) $1250.00
- — I (S) $700.00
- — Z (S) $1250.00
1910.37 A03
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.110 E04 III
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.141 C01 III
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.147 C04 II
- Issued
- May 1, 2003
- Abate by
- Jun 30, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.147 C06 I
- Issued
- May 1, 2003
- Abate by
- Jun 30, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.147 C07 I
- Issued
- May 1, 2003
- Abate by
- Jun 30, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.147 D04 I
- Issued
- May 1, 2003
- Abate by
- Jun 30, 2003
- Penalty
- Initial $2,500 · Current $2,500
Recent events (3)
- — A (S) $2500.00
- — I (S) $1400.00
- — Z (S) $2500.00
1910.176 B
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $1,000 · Current $1,000
Recent events (3)
- — A (S) $1000.00
- — I (S) $550.00
- — Z (S) $1000.00
1910.178 L01 I
- Issued
- May 1, 2003
- Abate by
- Jun 3, 2003
- Penalty
- Initial $1,000 · Current $1,000
Recent events (3)
- — A (S) $1000.00
- — I (S) $550.00
- — Z (S) $1000.00
1910.212 A03 II
- Issued
- May 1, 2003
- Abate by
- Jun 30, 2003
- Penalty
- Initial $2,500 · Current $2,500
Recent events (3)
- — A (S) $2500.00
- — I (S) $1400.00
- — Z (S) $2500.00
1910.213 B03
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $1,000 · Current $1,000
Recent events (3)
- — A (S) $1000.00
- — I (S) $550.00
- — Z (S) $1000.00
1910.213 H01
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $1,250 · Current $1,250
Recent events (3)
- — A (S) $1250.00
- — I (S) $700.00
- — Z (S) $1250.00
1910.219 D01
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $1,250 · Current $1,250
Recent events (3)
- — A (S) $1250.00
- — I (S) $700.00
- — Z (S) $1250.00
1910.219 F03
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $1,250 · Current $1,250
Recent events (3)
- — A (S) $1250.00
- — I (S) $700.00
- — Z (S) $1250.00
1910.303 B02
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.303 F
- Issued
- May 1, 2003
- Abate by
- May 19, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.304 F05 V
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
1910.305 B01
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $1,250 · Current $1,250
Recent events (3)
- — A (S) $1250.00
- — I (S) $650.00
- — Z (S) $1250.00
1910.305 G01 IIIA
- Issued
- May 1, 2003
- Abate by
- May 6, 2003
- Penalty
- Initial $750 · Current $750
Recent events (3)
- — A (S) $750.00
- — I (S) $400.00
- — Z (S) $750.00
More inspections at Trans-Shape, INC.
View Trans-Shape, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305159485.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.