CHARLOTTE, NC —
OSHA Inspection: A & A TRUCK AND AUTO CENTER, INC. (DBA AATAC, INC)
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of A & A TRUCK AND AUTO CENTER, INC. (DBA AATAC, INC) in 4000 SAM WILSON ROAD, CHARLOTTE, NC 28214 (NAICS 000000). OSHA activity number 305161291.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A & A TRUCK AND AUTO CENTER, INC. (DBA AATAC, INC)
- Site address
- 4000 SAM WILSON ROAD
- City
- CHARLOTTE
- State
- NC
- ZIP
- 28214
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3713
- Employees
- 57
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
25 citations on file for this inspection.
95012901
- Issued
- Mar 18, 2002
- Abate by
- Apr 4, 2002
- Penalty
- Initial $125 · Current $125
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to falling truck components and possibly equipment failure. a)facility, the employer had not determined the rated capacity of the shop-made lifting devices used to lift and move truck components during the manufacturing process. Among other method, one feasible and acceptable method to correct this hazard is to have the rated capacity determined by a register professional engineer.
1910.107 E09
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
- Penalty
- Initial $125 · Current $125
1910.107 G07
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.147 C04 I
- Issued
- Mar 18, 2002
- Abate by
- Apr 20, 2002
- Penalty
- Initial $100 · Current $100
1910.147 C06 I
- Issued
- Mar 18, 2002
- Abate by
- Apr 4, 2002
1910.107 B09
- Issued
- Mar 18, 2002
- Abate by
- Mar 28, 2002
1910.134 C01
- Issued
- Mar 18, 2002
- Abate by
- Apr 20, 2002
1910.134 K03
- Issued
- Mar 18, 2002
- Abate by
- Apr 20, 2002
1910.157 E02
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.179 J02 III
- Issued
- Mar 18, 2002
- Abate by
- Mar 24, 2002
1910.179 J03
- Issued
- Mar 18, 2002
- Abate by
- Mar 24, 2002
1910.179 M01
- Issued
- Mar 18, 2002
- Abate by
- Mar 24, 2002
1910.215 A04
- Issued
- Mar 18, 2002
- Abate by
- Mar 26, 2002
1910.215 B09
- Issued
- Mar 18, 2002
- Abate by
- Mar 26, 2002
1910.253 B02 II
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.253 B02 IV
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.253 B04 III
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.303 G01 II
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.304 F04
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.305 B02
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.305 G01 III
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.305 G02 III
- Issued
- Mar 18, 2002
- Abate by
- Mar 21, 2002
1910.1200 F05 I
- Issued
- Mar 18, 2002
- Abate by
- Mar 26, 2002
1910.1200 H01
- Issued
- Mar 18, 2002
- Abate by
- Apr 20, 2002
1910.212 A01
- Issued
- Mar 11, 2002
- Abate by
- Mar 14, 2002
- Penalty
- Initial $125 · Current $125
More inspections at A & a Truck and Auto Center, INC. (DBA Aatac, INC)
View A & a Truck and Auto Center, INC. (DBA Aatac, INC)'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305161291.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.