HIGHLAND PARK, IL —
OSHA Inspection: HIGHLAND PARK MILLWORK, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HIGHLAND PARK MILLWORK, INC. in 1580 OLD SKOKIE ROAD, HIGHLAND PARK, IL 60035 (NAICS 000000). OSHA activity number 305228728.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HIGHLAND PARK MILLWORK, INC.
- Site address
- 1580 OLD SKOKIE ROAD
- City
- HIGHLAND PARK
- State
- IL
- ZIP
- 60035
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 2431
- Employees
- 35
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 1, 2002
- Abate by
- Jul 16, 2002
- Penalty
- Initial $700 · Current $315 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of contact with a rotating saw blade: a) The #13 swing saw was equipped with a toggle-type motor starter switch that was not protected against unintended actuation by the normal movement of the machine operator or work as prescribed by the American National Standards for Woodworking Machinery, ANSI 01.1- 1992, Section 4.4.1.2. A feasible means of abatement would be to provide a motor switch that meets the requirements of ANSI 01.1-1992. Abatement certification required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $315.00
- — Z (S) $700.00
1910.133 A03
- Issued
- Jul 1, 2002
- Abate by
- Aug 16, 2002
- Penalty
- Initial $700 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $700.00
1910.212 B
- Issued
- Jul 1, 2002
- Abate by
- Jul 16, 2002
- Penalty
- Initial $525 · Current $235 Reduced
Recent events (2)
- — I (S) $235.00
- — Z (S) $525.00
1910.213 B03
- Issued
- Jul 1, 2002
- Abate by
- Aug 26, 2002
- Penalty
- Initial $875 · Current $395 Reduced
Recent events (2)
- — I (S) $395.00
- — Z (S) $875.00
1910.213 C01
- Issued
- Jul 1, 2002
- Abate by
- Aug 16, 2002
- Penalty
- Initial $2,500 · Current $1,125 Reduced
Recent events (2)
- — I (S) $1125.00
- — Z (S) $2500.00
1910.213 C02
- Issued
- Jul 1, 2002
- Abate by
- Aug 16, 2002
Recent events (2)
- — I (S)
- — Z (S)
1910.213 C03
- Issued
- Jul 1, 2002
- Abate by
- Aug 16, 2002
Recent events (2)
- — I (S)
- — Z (S)
1910.213 H01
- Issued
- Jul 1, 2002
- Abate by
- Jul 16, 2002
- Penalty
- Initial $875 · Current $395 Reduced
Recent events (2)
- — I (S) $395.00
- — Z (S) $875.00
1910.213 I01
- Issued
- Jul 1, 2002
- Abate by
- Jul 16, 2002
1910.219 E01 I
- Issued
- Jul 1, 2002
- Abate by
- Jul 16, 2002
More inspections at Highland Park Millwork, INC.
View Highland Park Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305228728.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.