GLENDALE, WI —
OSHA Inspection: JIM PANKOW INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JIM PANKOW INC. in 5380 N. PORT WASHINGTON RD., GLENDALE, WI 53217 (NAICS 236220). OSHA activity number 305278459.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JIM PANKOW INC.
- Site address
- 5380 N. PORT WASHINGTON RD.
- City
- GLENDALE
- State
- WI
- ZIP
- 53217
- Mailing
- W5073 COUNTY RD. O, PLYMOUTH, WI 53073
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- SIC code (legacy)
- 1542
- Employees
- 50
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
6 citations on file for this inspection.
1926.501 B01
- Issued
- Jul 23, 2003
- Abate by
- Jul 31, 2003
- Penalty
- Initial $3,000 · Current $1,500 Reduced
Recent events (2)
- — I (S) $1500.00
- — Z (S) $3000.00
5(a)(1)
- Issued
- Jul 23, 2003
- Abate by
- Jul 28, 2003
- Penalty
- Initial $3,000 · Current $3,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: (a)On or about June 25, 2003, at the jobsite located at 5380 N. Port Washington Rd., Glendale, WI., an employee was exposed to a fall hazard in excess of 25 feet while climbing over the top rail of a Skyjack SJ 7027 scissor lift to access the roof. A feasible means of abatement would be to comply with the American National Standards Institute (ANSI) A92.6-1999 Self-Propelled Elevating Work Platforms which requires workers to maintain firm footing on the platform floor while working thereon and states that climbing by occupants on the midrail or toprail of the aerial platform is prohibited. No certification required. Violation Abated.on
Recent events (2)
- — I (S) $3000.00
- — Z (S) $3000.00
1926.451 E01
- Issued
- Jul 23, 2003
- Abate by
- Jul 31, 2003
- Penalty
- Initial $1,200 · Current $1,200
Recent events (2)
- — I (S) $1200.00
- — Z (S) $1200.00
1926.451 G04 I
- Issued
- Jul 23, 2003
- Abate by
- Jul 28, 2003
- Penalty
- Initial $2,100 · Current $2,100
Recent events (2)
- — I (S) $2100.00
- — Z (S) $2100.00
1926.451 E01
- Issued
- Jul 23, 2003
- Abate by
- Jul 31, 2003
- Penalty
- Current $1,000
Recent events (3)
- — Q $1200.00
- — I (S) $1000.00
- — Z (S) $1200.00
1926.451 G04 I
- Issued
- Jul 23, 2003
- Abate by
- Jul 28, 2003
Recent events (3)
- — Q $2100.00
- — I (S)
- — Z (S) $2100.00
More inspections at JIM Pankow INC.
View JIM Pankow INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305278459.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.