MORTON GROVE, IL —
OSHA Inspection: DIEBEL MANUFACTURING CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DIEBEL MANUFACTURING CO. in 6505 OAKTON STREET, MORTON GROVE, IL 60053 (NAICS 000000). OSHA activity number 305623662.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIEBEL MANUFACTURING CO.
- Site address
- 6505 OAKTON STREET
- City
- MORTON GROVE
- State
- IL
- ZIP
- 60053
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3469
- Employees
- 60
- Ownership type
- A
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
- Penalty
- Initial $875 · Current $400 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Shop, West end- the Kalamazoo horizontal bandsaw, Serial #B465, was not equipped with a magnetic restart or similar device as prescribed by the American National Standards for Metal Cutting Saws, ANSI B11.10-1990, section 5.2.3.4, that in the event of an interruption in the electrical supply, would prevent the saw from restarting automatically when power is restored. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.212 A01
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.212 A03 II
- Issued
- Oct 18, 2002
- Abate by
- Oct 23, 2002
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.213 B03
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.217 B07 III
- Issued
- Oct 18, 2002
- Abate by
- Oct 23, 2002
- Penalty
- Initial $875 · Current $430 Reduced
Recent events (2)
- — I (S) $430.00
- — Z (S) $875.00
1910.217 B07 VC
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.217 C02 IA
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.217 C03 IIIF
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
1910.217 C05 I
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
- Penalty
- Initial $875 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $875.00
1910.335 A01 I
- Issued
- Oct 18, 2002
- Abate by
- Oct 23, 2002
- Penalty
- Initial $525 · Current $160 Reduced
Recent events (2)
- — I (S) $160.00
- — Z (S) $525.00
1910.147 C06 I
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
1910.217 E01 I
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
1910.219 B01
- Issued
- Oct 18, 2002
- Abate by
- Oct 23, 2002
1910.303 B02
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
1910.305 B01
- Issued
- Oct 18, 2002
- Abate by
- Dec 6, 2002
More inspections at Diebel Manufacturing CO.
View Diebel Manufacturing CO.'s full OSHA safety record →
More inspections in this industry (NAICS 000000)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305623662.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.