RALEIGH, NC ·
OSHA Inspection: CITADEL AUTOMOTIVE GROUP, INC. DBA HAROLD ESTES BO
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of CITADEL AUTOMOTIVE GROUP, INC. DBA HAROLD ESTES BO in 110 ILEAGNES ROAD, RALEIGH, NC 27603 (NAICS 811121). OSHA activity number 305726770.
What this inspection record means
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Citadel Automotive Group, INC. DBA Harold Estes BO for free
Get an email when a new federal OSHA severe-injury report for Citadel Automotive Group, INC. DBA Harold Estes BO is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CITADEL AUTOMOTIVE GROUP, INC. DBA HAROLD ESTES BO
- Site address
- 110 ILEAGNES ROAD
- City
- RALEIGH
- State
- NC
- ZIP
- 27603
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- SIC code (legacy)
- 7532
- Employees
- 10
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
40 citations on file for this inspection.
95012901
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
- Penalty
- Initial $350 · Current $350
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck by hazard: a)131 Ileagnes Road - where a pneumatic stationary automotive lift was being used during mechanical work and inspections, safety and warning labels were not available, periodic inspections were not being conducted, and preventative maintenance was not being performed. REF: ANSI/ALI ALOIM-2000, Standard for Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance. b)facility, body shop - where a pneumatic Cheetah frame machine (roll on type superstructure) was used to lift vehicles in order to test the vehicle frame and to lift above the ground for servicing, safety and warning labels were not available, periodic inspections were not being conducted, and preventative maintenance was not being performed. REF: ANSI/ALI ALOIM-2000, Standard for Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance. c)facility, body shop - where a pneumatic Cheetah frame machine (roll on type superstructure) was used to lift vehicles in order to test the vehicle frame and to lift above the ground for servicing, safety and warning labels were not available, periodic inspections were not being conducted, and preventative maintenance was not being performed. REF: ANSI/ALI ALOIM-2000, Standard for Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance. d)facility, body shop - where a pneumatic Truck 'N Special frame machine (roll on type superstructure) was used to lift vehicles in order to test the vehicle frame and to lift above the ground for servicing, safety and warning labels were not available, periodic inspections were not being conducted, and preventative maintenance was not being performed. REF: ANSI/ALI ALOIM-2000, Standard for Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance. ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS TO FOLLOW PROCEDURES LISTED IN ANSI/ALI ALOIM-2000, TO INCLUDE DETERMINING THE CAPACITY OF THE LIFTS, HAVING THE LIFTS INSPECTED BY A QUALIFIED PERSON, AND DEVELOPING A PREVENTATIVE MAINTENANCE SCHEDULE.
1910.22 D01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
- Penalty
- Initial $125 · Current $125
1910.23 C01
- Issued
- Dec 23, 2002
- Abate by
- Dec 27, 2002
1910.253 B04 III
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
- Penalty
- Initial $125 · Current $125
1910.303 G01 V
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
- Penalty
- Initial $175 · Current $175
1910.304 F04
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.305 D
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
1910.305 B01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
7F0102
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
7F0102
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.107 E09
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
1910.132 A
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
1910.132 D01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.133 A01
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
1910.134 C01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 C02 I
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 C02 II
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 D03 IIIB2
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 E01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 F02
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 H01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 H02 I
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 H03 IIA
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.134 K01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.157 C04
- Issued
- Dec 23, 2002
- Abate by
- Dec 27, 2002
1910.157 E02
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.157 E03
- Issued
- Dec 23, 2002
- Abate by
- Dec 27, 2002
1910.157 G01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.242 B
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
1910.303 F
- Issued
- Dec 23, 2002
- Abate by
- Jan 21, 2003
1910.303 G01 II
- Issued
- Dec 23, 2002
- Abate by
- Dec 27, 2002
1910.305 B01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.305 B02
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.305 G01 III
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.305 J01 IV
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.1025 D02
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.1025 L01 I
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.1052 D02
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.1052 L01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
1910.1200 E01
- Issued
- Dec 23, 2002
- Abate by
- Feb 11, 2003
More inspections in this industry (NAICS 811121)
Jul 29, 2026
Brooks Collision Center, L.L.C. · PINEY FLATS, TN
Jul 29, 2026
Vegas Auto LAB Body Shop INC · LAS VEGAS, NV
Jul 23, 2026
317744864 - Johnson Auto Body INC · CLATSKANIE, OR
Jul 21, 2026
WA317992156 - Collision Specialties II INC · SNOHOMISH, WA
Jul 17, 2026
Colorado CAR Works · LAKEWOOD, CO
More inspections in NC
Jul 29, 2026
161641 - Stanly County - Transportation · ALBEMARLE, NC
Jul 29, 2026
161639 - Carolina Custom Exterior, INC. · WILMINGTON, NC
Jul 29, 2026
161638 - Fayetteville Public Works Commission · FAYETTEVILLE, NC
Jul 29, 2026
161637 - True Homes, LLC · WINSTON SALEM, NC
Jul 29, 2026
161636 - Alejandro Jose Manuel Rodriges · WINSTON SALEM, NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305726770.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.