FISHKILL, NY —
OSHA Inspection: CRANESVILLE BLOCK CO. INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CRANESVILLE BLOCK CO. INC. in 70 ROUTE 9, FISHKILL, NY 12524 (NAICS 327320). OSHA activity number 305786469.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRANESVILLE BLOCK CO. INC.
- Site address
- 70 ROUTE 9
- City
- FISHKILL
- State
- NY
- ZIP
- 12524
- Mailing
- 774 STATE HIGHWAY 5S, AMSTERDAM, NY 12010
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327320
- SIC code (legacy)
- 3273
- Employees
- 15
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 8, 2003
- Abate by
- Aug 10, 2003
- Penalty
- Initial $2,125 · Current $1,275 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: Employees were exposed to the hazard of being caught in or crushed by a moving conveyor: Or, in the alternative; 29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by: ingoing nip points and moving/rotating parts: (a)Tunnel: Conveyor was not guarded and/or equipped with an audible start- up alarm and emergency stop device, on or about 01/27/03. Among others, one feasible method of abating the hazard includes: Installation of an audible start-up alarm, emergency stop device, and guarding which meets the requirements of ANSI/ASME B.20.1-1987, Safety Standard for Conveyors and Related Equipment. ABATEMENT CERTIFICATION REQUIREDATION
Recent events (2)
- — J (S) $1275.00
- — Z (S) $2125.00
1910.110 D10
- Issued
- Jul 8, 2003
- Abate by
- Jul 21, 2003
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — J (S) $1275.00
- — Z (S) $2125.00
1910.146 C04
- Issued
- Jul 8, 2003
- Abate by
- Jul 21, 2003
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — J (S) $1275.00
- — Z (S) $2125.00
1910.147 C05 I
- Issued
- Jul 8, 2003
- Abate by
- Jul 26, 2003
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — J (S) $1275.00
- — Z (S) $2125.00
1910.147 D02
- Issued
- Jul 8, 2003
- Abate by
- Jul 26, 2003
Recent events (2)
- — J (S)
- — Z (S)
1910.147 C06 I
- Issued
- Jul 8, 2003
- Abate by
- Jul 21, 2003
- Penalty
- Initial $2,125 · Current $1,275 Reduced
Recent events (2)
- — J (S) $1275.00
- — Z (S) $2125.00
1910.212 A02
- Issued
- Jul 8, 2003
- Abate by
- Jul 21, 2003
- Penalty
- Initial $1,275 · Current $765 Reduced
Recent events (2)
- — J (S) $765.00
- — Z (S) $1275.00
1910.157 C04
- Issued
- Jul 8, 2003
- Abate by
- Jul 21, 2003
- Penalty
- Initial $1,700 · Current $1,020 Reduced
Recent events (2)
- — J (S) $1020.00
- — Z (S) $1700.00
1910.157 E03
- Issued
- Jul 8, 2003
- Abate by
- Jul 26, 2003
Recent events (2)
- — J (S)
- — Z (S)
1910.157 G02
- Issued
- Jul 8, 2003
- Abate by
- Jul 26, 2003
Recent events (2)
- — J (S)
- — Z (S)
1910.22 C
- Issued
- Jul 8, 2003
- Abate by
- Jul 26, 2003
- Penalty
- Initial $12,500 · Current $7,500 Reduced
Recent events (2)
- — J (R) $7500.00
- — Z (R) $12500.00
1910.23 C01
- Issued
- Jul 8, 2003
- Abate by
- Jul 26, 2003
- Penalty
- Initial $10,000 · Current $10,000
Recent events (2)
- — J (R) $10000.00
- — Z (R) $10000.00
More inspections at Cranesville Block CO. INC.
View Cranesville Block CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327320)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 305786469.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.