LAS VEGAS, NV —
OSHA Inspection: ALL AMERICAN BLIND AND SHUTTER FACTORY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALL AMERICAN BLIND AND SHUTTER FACTORY in 3675 SOUTH HIGHLAND DRIVE, LAS VEGAS, NV 89103 (NAICS 321918). OSHA activity number 306120247.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL AMERICAN BLIND AND SHUTTER FACTORY
- Site address
- 3675 SOUTH HIGHLAND DRIVE
- City
- LAS VEGAS
- State
- NV
- ZIP
- 89103
- Mailing
- 2545 EAST WASHBURN, LAS VEGAS, NV 89030
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- SIC code (legacy)
- 2431
- Employees
- 14
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
19 citations on file for this inspection.
618037501
- Issued
- Mar 20, 2003
- Abate by
- Apr 22, 2003
- Penalty
- Initial $450 · Current $270 Reduced
General-duty citation text
Nevada Revised Statute 618.375(1): The employer failed to furnish employment and a place of employment which was free from recognized hazards that were causing or were likely to cause death or serious physical harm to his employees: The employer failed to furnish employment free from recognized hazards in that: a. Schedule 40 PVC pipe was installed and used to distribute up to 120 psi of compressed air, which is not recommended by the manufacturer because of heat breakdown and potential fragmentation. Employees were exposed to potential serious injures from being struck by PVC fragments. One feasible and acceptable method, among others, would be to replace the PVC pipe with a pipe capable of withstanding compressed air distribution. Reference: PVC manufacturer's data caution and warning notes which state, "Do not use compressed air or gas for pressure testing", "PVC and CPVC products are not recommended for use in compressed air or gas systems", and "the manufacturer does not recommend its PVC or CPVC products for use in air or compressed gas systems. PVC and CPVC pipe, fittings, and valves are excellent products for the transport of water and corrosive chemicals. But there are a number of other piping products that are especially designed and suited for compressed air and gasses."ed
Recent events (2)
- — I (S) $270.00
- — Z (S) $450.00
1910.212 A01
- Issued
- Mar 20, 2003
- Abate by
- Apr 7, 2003
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.304 F04
- Issued
- Mar 20, 2003
- Abate by
- Apr 2, 2003
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.305 B02
- Issued
- Mar 20, 2003
- Abate by
- Apr 2, 2003
Recent events (2)
- — I (S)
- — Z (S)
618037601
- Issued
- Mar 17, 2003
- Abate by
- Mar 21, 2003
6180538
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
618054201 C
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
618055601
- Issued
- Mar 17, 2003
- Abate by
- Mar 28, 2003
1910.22 D01
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
1910.37 K02
- Issued
- Mar 17, 2003
- Abate by
- Mar 21, 2003
1910.38 A01
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
1910.110 F02 II
- Issued
- Mar 17, 2003
- Abate by
- Mar 21, 2003
1910.132 D02
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
1910.157 E03
- Issued
- Mar 17, 2003
- Abate by
- Mar 28, 2003
1910.212 A01
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
1910.242 A
- Issued
- Mar 17, 2003
- Abate by
- Mar 21, 2003
1910.242 B
- Issued
- Mar 17, 2003
- Abate by
- Mar 21, 2003
1910.1200 E01
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
1910.1200 G01
- Issued
- Mar 17, 2003
- Abate by
- Apr 11, 2003
More inspections at ALL American Blind and Shutter Factory
View ALL American Blind and Shutter Factory's full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in NV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306120247.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.