MANSFIELD, TX —
OSHA Inspection: NU VAN TECHNOLOGY,INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NU VAN TECHNOLOGY,INC. in 2155 HIGHWAY 1187, MANSFIELD, TX 76063 (NAICS 336212). OSHA activity number 306201732.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NU VAN TECHNOLOGY,INC.
- Site address
- 2155 HIGHWAY 1187
- City
- MANSFIELD
- State
- TX
- ZIP
- 76063
- Mailing
- P.O. BOX 759, MANSFIELD, TX 76063
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336212
- SIC code (legacy)
- 3715
- Employees
- 75
- Ownership type
- A
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 15, 2003
- Abate by
- Oct 17, 2003
- Penalty
- Initial $1,750 · Current $800 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to:Section 5(a)(1) of the Occupational Safety and Health Act of 1970: At this facility in the fab shop where employees operate two press brakes with the foot control, employees were exposed to the points of operation of the press brakes: (a) Fab Shop area: Pacific J-series Hydraulic press brake, s/n 91413, used to bend and shape metal, point of operation was not guarded, stroke was initiated by a foot pedal. (b) Fab Shop area: Niagara press brake, model HBM 350-12-14 , used to bend and shape metal, point of operation was not guarded, stroke was initiated by a foot pedal. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: Implement an effective "Safe Distance" Safeguarding Program as described in ANSI B11.3 1982, Safety Requirements for Construction, Care, and Use of Power Press Brakes. Elements of the program include: (a)Exposure prevention procedures (b)Training (c)Retraining (d)Supervision (e)Periodic inspections
Recent events (2)
- — I (S) $800.00
- — Z (S) $1750.00
1910.107 E02
- Issued
- Sep 15, 2003
- Abate by
- Sep 19, 2003
- Penalty
- Initial $1,400 · Current $700 Reduced
Recent events (2)
- — I (S) $700.00
- — Z (S) $1400.00
1910.147 C06 II
- Issued
- Sep 15, 2003
- Abate by
- Sep 25, 2003
- Penalty
- Initial $1,750 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1750.00
1910.147 C07 IV
- Issued
- Sep 15, 2003
- Abate by
- Sep 18, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.178 L06
- Issued
- Sep 15, 2003
- Abate by
- Sep 23, 2003
- Penalty
- Initial $1,400 · Current $1,400
Recent events (2)
- — I (S) $1400.00
- — Z (S) $1400.00
1910.178 P01
- Issued
- Sep 15, 2003
- Abate by
- Sep 23, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A05
- Issued
- Sep 15, 2003
- Abate by
- Sep 19, 2003
- Penalty
- Initial $1,750 · Current $1,750
Recent events (2)
- — I (S) $1750.00
- — Z (S) $1750.00
1910.219 E01 I
- Issued
- Sep 15, 2003
- Abate by
- Sep 23, 2003
- Penalty
- Initial $1,400 · Current $1,400
Recent events (2)
- — I (S) $1400.00
- — Z (S) $1400.00
1910.212 A05
- Issued
- Sep 15, 2003
- Abate by
- Sep 19, 2003
- Penalty
- Current $700
Recent events (3)
- — Q $1750.00
- — I (S) $700.00
- — Z (S) $1750.00
1910.219 E01 I
- Issued
- Sep 15, 2003
- Abate by
- Sep 23, 2003
Recent events (3)
- — Q $1400.00
- — I (S)
- — Z (S) $1400.00
1910.157 C01
- Issued
- Sep 15, 2003
- Abate by
- Sep 19, 2003
Recent events (2)
- — I (O)
- — Z (O)
1910.254 D09 III
- Issued
- Sep 15, 2003
- Abate by
- Sep 23, 2003
Recent events (2)
- — I (O)
- — Z (O)
1910.303 G02 I
- Issued
- Sep 15, 2003
- Abate by
- Sep 19, 2003
Recent events (2)
- — I (O)
- — Z (O)
More inspections at NU VAN Technology,Inc.
View NU VAN Technology,Inc.'s full OSHA safety record →
More inspections in this industry (NAICS 336212)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306201732.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.