LAKE ZURICH, IL —
OSHA Inspection: GOUDIE TOOL & ENGINEERING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GOUDIE TOOL & ENGINEERING, INC. in 480 TELSER ROAD, LAKE ZURICH, IL 60047 (NAICS 326199). OSHA activity number 306230822.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GOUDIE TOOL & ENGINEERING, INC.
- Site address
- 480 TELSER ROAD
- City
- LAKE ZURICH
- State
- IL
- ZIP
- 60047
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 13
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 14, 2003
- Abate by
- Mar 3, 2003
- Penalty
- Initial $600 · Current $350 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of contact with a moving saw blade: a) The Emerson and Craftsman band saws were not equipped with magnetic restart or similar devices, as prescribed by the American National Standards for Metal Cutting Saws, ANSI B11.10-1990, Section 5.2.3.4, that in the event of an interruption in the electrical supply would prevent the saw from restarting automatically when power is restored. A feasible means of abatement would be to provide a magnetic restarter or similar device as required by ANSI B11.10-1990. b) The Craftsman band saw was equipped with an unprotected toggle-type motor starter switch instead of a starter that was located, designed, constructed, interlocked, or guarded to protect against unintended operation, as prescribed by the American National Standards for Metal Cutting Saws, ANSI B11.10-1990, Section 5.2.3.1. A feasible method of abatement would be to provide a motor starter switch that meets the requirements of ANSI B11.10-1990. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $350.00
- — Z (S) $600.00
1910.212 A01
- Issued
- Feb 14, 2003
- Abate by
- Mar 3, 2003
- Penalty
- Initial $600 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $600.00
1910.219 D01
- Issued
- Feb 14, 2003
- Abate by
- Mar 3, 2003
- Penalty
- Initial $600 · Current $350 Reduced
Recent events (2)
- — I (S) $350.00
- — Z (S) $600.00
1910.219 E03 I
- Issued
- Feb 14, 2003
- Abate by
- Mar 3, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.219 E05 I
- Issued
- Feb 14, 2003
- Abate by
- Mar 3, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C01
- Issued
- Feb 14, 2003
- Abate by
- Apr 3, 2003
Recent events (2)
- — I (O)
- — Z (O)
More inspections in this industry (NAICS 326199)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306230822.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.