FULTON, NY —
OSHA Inspection: D-K MANUFACTURING CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D-K MANUFACTURING CORP. in 551 WEST THIRD STREET, FULTON, NY 13069 (NAICS 332116). OSHA activity number 306311663.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D-K MANUFACTURING CORP.
- Site address
- 551 WEST THIRD STREET
- City
- FULTON
- State
- NY
- ZIP
- 13069
- Mailing
- P.O. BOX 600, FULTON, NY 13069
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- SIC code (legacy)
- 3469
- Employees
- 25
- Ownership type
- A
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 25, 2003
- Abate by
- Jan 12, 2004
- Penalty
- Initial $375 · Current $244 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of falling into the elevator shaft and/or being struck by the elevator car: a)Main Building, on or about 9/17/03: A freight/passenger elevator provided for moving stock and parts between three floors was not provided with doors so interlocked at each floor as to prevent their opening when the platform is not located at that floor and the elevator car did not have interlocked doors to fully enclose the operator. Among other methods, acceptable and feasible abatement methods to correct these hazards are to: 1.Install door interlocks on the hoistway doors. The interlocking devices shall lock the door in the closed position before the elevator can be operated and prevent the door from opening when the platform is not parked on that level in accordance with ANSI/ASME A17.3-1986 Safety Code for Elevators and Escalators, Section 2.7.1 2.Install car door or a gate at the entrance of the elevator car positively opened by a lever or other device attached to and operated by the door or gate in accordance with ANSI/ASME A17.3-1986 Safety Code for Elevators and Escalators, Section 3.4.2. Abatement certification must be submitted for this item.
Recent events (3)
- — P (S) $243.75
- — I (S) $243.75
- — Z (S) $375.00
1910.36 H03
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.37 A03
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.37 B02
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C04 I
- Issued
- Sep 25, 2003
- Abate by
- Jan 12, 2004
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (3)
- — P (S) $243.75
- — I (S) $243.75
- — Z (S) $375.00
1910.157 G02
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $225 · Current $146 Reduced
Recent events (2)
- — I (S) $146.25
- — Z (S) $225.00
1910.178 L04 III
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $225 · Current $146 Reduced
Recent events (2)
- — I (S) $146.25
- — Z (S) $225.00
1910.212 A01
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $300 · Current $195 Reduced
Recent events (2)
- — I (S) $195.00
- — Z (S) $300.00
1910.212 A03 II
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.217 B03 I
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.217 E01 I
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.217 B04 I
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.217 B07 VA
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.217 C01 I
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.217 C02 IA
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.219 B01
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $375 · Current $244 Reduced
Recent events (2)
- — I (S) $243.75
- — Z (S) $375.00
1910.242 B
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
- Penalty
- Initial $225 · Current $146 Reduced
Recent events (2)
- — I (S) $146.25
- — Z (S) $225.00
1910.305 B01
- Issued
- Sep 25, 2003
- Abate by
- Oct 28, 2003
Recent events (2)
- — I (O)
- — Z (O)
More inspections at D-K Manufacturing Corp.
View D-K Manufacturing Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306311663.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.