UTICA, NY ·
OSHA Inspection: NEW HARTFORD SHEET METAL
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of NEW HARTFORD SHEET METAL in 1821 BROAD ST., UTICA, NY 13503 (NAICS 332999). OSHA activity number 306314642.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEW HARTFORD SHEET METAL
- Site address
- 1821 BROAD ST.
- City
- UTICA
- State
- NY
- ZIP
- 13503
- Mailing
- 1821 BROAD ST., PO BOX 488, UTICA, NY 13503
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- SIC code (legacy)
- 3499
- Employees
- 24
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 20, 2004
- Abate by
- Aug 9, 2004
- Penalty
- Initial $750 · Current $488 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of an aluminum dust explosion: a)Aluminum Sanding/ Grinding Area, On or about 2/2/04: The pedestal grinder was not provided with a hood or enclosure connected to a dust collection system. NFPA 65, 1993 section 2-1.1. b)Aluminum Sanding/ Grinding Area, On or about 2/2/04: Dry type dust collectors were not located outside of the building. NFPA 65, 1993 section 2- 1.5. c)Aluminum Sanding/ Grinding Area, On or about 2/2/04: Dust collection systems were not dedicated to the collection of aluminum or aluminum alloy dust only. NFPA 65, 1993 section 2-1.7. d)Aluminum Sanding/ Grinding Area, On or about 2/2/04: Aluminum dust was not removed from the interior and exterior of the collection systems on a daily basis, accumulation of dust was not removed. NFPA 65, 1993 section 2-4.3, 2-4.4. e)Aluminum Sanding/ Grinding Area, On or about 2/2/04: Aluminum dust/ waste material was not discharged into metal containers that are covered. NFPA 65, 1993 section 2-4.4. f)Aluminum Sanding/ Grinding Area, On or aobut 2/2/04: Vacuum cleaners not specifically designed for combustible dusts were used to clean up aluminum dust. NFPA 65, 1993, section 3-1.4. Among other methods, one feasible method of abatement is to: 1) Follow all of the requirements of NFPA 65, Processing and Finishing of Aluminum, 1993 Edition. Abatement certification must be submitted for this item.
Recent events (3)
- · P (S) $487.50
- · I (S) $487.50
- · Z (S) $750.00
1910.307 B02 I
- Issued
- Feb 20, 2004
- Abate by
- Mar 9, 2004
Recent events (2)
- · I (S)
- · Z (S)
1910.36 D02
- Issued
- Feb 20, 2004
- Abate by
- Feb 28, 2004
- Penalty
- Initial $750 · Current $488 Reduced
Recent events (2)
- · I (S) $487.50
- · Z (S) $750.00
1910.37 A03
- Issued
- Feb 20, 2004
- Abate by
- Feb 28, 2004
Recent events (2)
- · I (S)
- · Z (S)
1910.94 A05 V
- Issued
- Feb 20, 2004
- Abate by
- Mar 9, 2004
- Penalty
- Initial $600 · Current $390 Reduced
Recent events (2)
- · I (S) $390.00
- · Z (S) $600.00
1910.147 C01
- Issued
- Feb 20, 2004
- Abate by
- Mar 24, 2004
- Penalty
- Initial $750 · Current $488 Reduced
Recent events (2)
- · I (S) $487.50
- · Z (S) $750.00
1910.303 G02 I
- Issued
- Feb 20, 2004
- Abate by
- Feb 28, 2004
- Penalty
- Initial $750 · Current $488 Reduced
Recent events (2)
- · I (S) $487.50
- · Z (S) $750.00
More inspections at NEW Hartford Sheet Metal
View NEW Hartford Sheet Metal's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 306314642.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.