MARSING, ID —
OSHA Inspection: ATLAS MINE & MILL SUPPLY, INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of ATLAS MINE & MILL SUPPLY, INC. in DELAMAR MINE & MILL SITE, MARSING, ID 83639 (NAICS 238290). OSHA activity number 306439985.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATLAS MINE & MILL SUPPLY, INC.
- Site address
- DELAMAR MINE & MILL SITE
- City
- MARSING
- State
- ID
- ZIP
- 83639
- Mailing
- N 1115 HAVANA ST, SPOKANE, WA 99202
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238290
- SIC code (legacy)
- 1796
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 21, 2004
- Abate by
- Nov 9, 2004
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee(s) who were exposed to an unstable elevated load: (a)On or about 13 July 2004, at the DeLamar Mine and Mill site in Owyhee County Idaho, the employer failed to ensure that the mill support/jacking cradles were secured against hazardous motion, in accordance with the manufacturer's written instructions, while lowering the Semi-Autogenous Grinding (SAG) Mill onto its trunnion assembly. (b)On or about 13 July 2004, the employer failed to utilize the engineered jacking points on the support/jacking cradle who placed a third hydraulic jack at a point off a center on the support/jacking cradle without proper blocking and bracing. To abate this violation, the employer must: (a) Follow the manufacturer's instructions by using sound hardwood or steel beams as rigid cribbing beneath the cradle and secure the cradle with a wire rope over the drum. (b) When raising or lowering the steel beam/cradle utilize the designed jacking points. Pursuant to 29 CFR 1903.19(d), the employer must abate this hazard within ten calendar days and provide documentation that this violation has been abated within 15 working days of the date received.
Recent events (2)
- — I (S) $1200.00
- — Z (S) $2000.00
1910.147 C04 I
- Issued
- Oct 21, 2004
- Abate by
- Nov 9, 2004
- Penalty
- Initial $2,000 · Current $1,200 Reduced
Recent events (2)
- — I (S) $1200.00
- — Z (S) $2000.00
1910.244 A02 VIB
- Issued
- Oct 21, 2004
- Abate by
- Nov 9, 2004
- Penalty
- Initial $2,000
Recent events (2)
- — I (S)
- — Z (S) $2000.00
1910.179 J04 II
- Issued
- Oct 21, 2004
- Abate by
- Nov 9, 2004
Recent events (2)
- — I (O)
- — Z (O)
1926.850 A
- Issued
- Oct 21, 2004
- Abate by
- Nov 9, 2004
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Atlas Mine & Mill Supply, INC.
View Atlas Mine & Mill Supply, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238290)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306439985.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.