NAMPA, ID ·
OSHA Inspection: FRONTIER EQUIPMENT
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FRONTIER EQUIPMENT in 1905 MADISON AVENUE, NAMPA, ID 83687 (NAICS 423830). OSHA activity number 306441999.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRONTIER EQUIPMENT
- Site address
- 1905 MADISON AVENUE
- City
- NAMPA
- State
- ID
- ZIP
- 83687
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423830
- SIC code (legacy)
- 5084
- Employees
- 38
- Ownership type
- A
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
- Penalty
- Initial $750 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by high pressure air and/or flying debris: a)West, north and east walls, fork lift repair shop - Frontier Equipment - 1905 Madison Avenue, Nampa, ID; The employer did not prevent the use of schedule 40 PVC for supplying high pressure air for employees to power tools and equipment exposing them to the hazard of being struck by compressed air and flying debris. b)All walls of warehouse and race car shop - Frontier Equipment - 1905 Madison Avenue, Nampa, ID; The employer did not prevent the use of schedule 40 PVC for supplying high pressure air for employees to power tools and equipment exposing them to the hazard of being struck by compressed air and flying debris. Among other methods, one feasible and acceptable method to correct this hazard is to replace all PVC piping and fittings with steel or copper piping and fittings. Note: Abatement certification or documentation is NOT required for this item.
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.36 B06
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.37 B02
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.37 B06
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
1910.38 A01
- Issued
- May 6, 2005
- Abate by
- Jun 23, 2005
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- · I (S) $500.00
- · Z (S) $1000.00
1910.39 A
- Issued
- May 6, 2005
- Abate by
- Jun 23, 2005
1910.165 B05
- Issued
- May 6, 2005
- Abate by
- Jun 23, 2005
1910.215 A02
- Issued
- May 6, 2005
- Abate by
- May 25, 2005
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.243 C01
- Issued
- May 6, 2005
- Abate by
- May 25, 2005
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.1200 E01
- Issued
- May 6, 2005
- Abate by
- Jun 23, 2005
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- · I (S) $375.00
- · Z (S) $750.00
1910.22 A01
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
1910.22 D01
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
1910.212 A01
- Issued
- May 6, 2005
- Abate by
- May 25, 2005
1910.303 H03 I
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
1910.305 A01 I
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
1910.305 B02
- Issued
- May 6, 2005
- Abate by
- May 11, 2005
1910.334 A02 I
- Issued
- May 6, 2005
- Abate by
- May 25, 2005
More inspections in this industry (NAICS 423830)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306441999.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.