HOUSTON, TX —
OSHA Inspection: RIGID BUILDING SYSTEMS LTD
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of RIGID BUILDING SYSTEMS LTD in 18933 ALDINE WESTFIELD, HOUSTON, TX 77073 (NAICS 332311). OSHA activity number 306568312.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RIGID BUILDING SYSTEMS LTD
- Site address
- 18933 ALDINE WESTFIELD
- City
- HOUSTON
- State
- TX
- ZIP
- 77073
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332311
- SIC code (legacy)
- 3448
- Employees
- 100
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- May 6, 2004
- Abate by
- Jun 8, 2004
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the following conditions: (a)Millenium/Rigid Building Systems, 18933 Aldine Westfield, Houston, TX, 77073, employees exposed to the hazard of being struck by and/or crushed by steel plate and/or the vacuum under-the-hook-lifting-device in that a program of frequent and periodic inspection of the underhung plate loader crane in Bay 1 by plasma machine had not been established. One feasible and useful abatement method to correct this hazard includes, but is not limited to, inspecting the underhung crane in accordance with ANSI B30.11 Monorail Systems and Underhung Cranes. *** Certification and Documentation of Abatement Required ***
1910.147 C07 I
- Issued
- May 6, 2004
- Abate by
- May 17, 2004
- Penalty
- Initial $4,000 · Current $4,000
Recent events (2)
- — I (S) $4000.00
- — Z (S) $4000.00
1910.147 D03
- Issued
- May 6, 2004
- Abate by
- May 10, 2004
- Penalty
- Initial $4,000 · Current $4,000
Recent events (2)
- — I (S) $4000.00
- — Z (S) $4000.00
1910.334 A02 I
- Issued
- May 6, 2004
- Abate by
- May 10, 2004
- Penalty
- Initial $1,600 · Current $1,600
1910.147 C07 I
- Issued
- May 6, 2004
- Abate by
- May 17, 2004
- Penalty
- Current $4,000
Recent events (3)
- — Q $4000.00
- — I (S) $4000.00
- — Z (S) $4000.00
1910.147 D03
- Issued
- May 6, 2004
- Abate by
- May 10, 2004
Recent events (3)
- — Q $4000.00
- — I (S)
- — Z (S) $4000.00
5(a)(1)
- Issued
- May 6, 2004
- Abate by
- May 17, 2004
- Penalty
- Initial $5,600 · Current $5,600
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the following conditions: (a)Millennium/Rigid Building Systems, 18933 Aldine Westfield, Houston, TX, 77073, Bay 1, employees were exposed to the hazard of being struck by and/or crushed by steel plate because below-the-hook lifting devices such as the plate loader vacuum lift S/N 95-15-3688 attached to the underhung crane by the plasma machine, was not frequently and periodically inspected to identify hazardous deficiencies in the lifting device. Of particular concern with this crane and UTHLD is that the weight of the UTHLD and the steel plate it lifts is within a few pounds of the total capacity of the crane hoist. One feasible and useful abatement method to correct this hazard includes, but is not limited to, inspecting all below-the-hook lifting devices in accordance with ANSI B 30.20, Below-The- Hook-Lifting-Devices. MILLENNIUM/RIGID BUILDING SYSTEMS WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 304512221, CITATION NUMBER 1, ITEM NUMBER 1, ISSUED ON 04/03/2003.
1904.29 A
- Issued
- May 6, 2004
- Abate by
- May 17, 2004
- Penalty
- Initial $800 · Current $800
1904.32 B03
- Issued
- May 6, 2004
- Abate by
- May 10, 2004
1910.184 E01
- Issued
- May 6, 2004
- Abate by
- May 17, 2004
- Penalty
- Initial $100 · Current $100
More inspections at Rigid Building Systems LTD
View Rigid Building Systems LTD's full OSHA safety record →
More inspections in this industry (NAICS 332311)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306568312.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.