CORPUS CHRISTI, TX —
OSHA Inspection: ROGERS PRECISION MACHINES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ROGERS PRECISION MACHINES, INC. in 5221 AGNES STREET, CORPUS CHRISTI, TX 78405 (NAICS 332710). OSHA activity number 306690470.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROGERS PRECISION MACHINES, INC.
- Site address
- 5221 AGNES STREET
- City
- CORPUS CHRISTI
- State
- TX
- ZIP
- 78405
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- SIC code (legacy)
- 3599
- Employees
- 5
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 21, 2003
- Abate by
- Oct 15, 2003
- Penalty
- Initial $225 · Current $135 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of flying debris: At this location, in the shop, employees were exposed to the hazards of flying shards in that the shop air was piped through this facility via Poly-Vinyl-Chloride (PVC) piping. Plastic pipe is subject to failure and shattering when exposed to the pressures of compressed gasses. A means of abatement would be to replace the existing PVC piping with a type suitable for the transmission of compressed gases.
Recent events (2)
- — I (S) $135.00
- — Z (S) $225.00
1910.157 E03
- Issued
- Aug 21, 2003
- Abate by
- Sep 5, 2003
- Penalty
- Initial $525 · Current $135 Reduced
Recent events (2)
- — I (S) $135.00
- — Z (S) $525.00
1910.215 A04
- Issued
- Aug 21, 2003
- Abate by
- Sep 5, 2003
- Penalty
- Initial $525 · Current $135 Reduced
Recent events (2)
- — I (S) $135.00
- — Z (S) $525.00
1910.219 C04 I
- Issued
- Aug 21, 2003
- Abate by
- Oct 15, 2003
- Penalty
- Initial $525 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $525.00
1910.219 D01
- Issued
- Aug 21, 2003
- Abate by
- Sep 5, 2003
- Penalty
- Initial $525 · Current $525
Recent events (2)
- — I (S) $525.00
- — Z (S) $525.00
1910.219 E03 I
- Issued
- Aug 21, 2003
- Abate by
- Sep 5, 2003
Recent events (2)
- — I (S)
- — Z (S)
1910.242 A
- Issued
- Aug 21, 2003
- Abate by
- Sep 3, 2003
- Penalty
- Initial $225 · Current $135 Reduced
Recent events (2)
- — I (S) $135.00
- — Z (S) $225.00
1910.242 B
- Issued
- Aug 21, 2003
- Abate by
- Sep 5, 2003
- Penalty
- Initial $525 · Current $135 Reduced
Recent events (2)
- — I (S) $135.00
- — Z (S) $525.00
1910.305 A02 IIIF
- Issued
- Aug 21, 2003
- Abate by
- Sep 3, 2003
- Penalty
- Initial $300
Recent events (2)
- — I (O)
- — Z (S) $300.00
More inspections at Rogers Precision Machines, INC.
View Rogers Precision Machines, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306690470.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.