KIMBERLY, WI ·
OSHA Inspection: BESSETTE CONSTRUCTION INC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of BESSETTE CONSTRUCTION INC in GRAZIES RESTURANT ON KK, KIMBERLY, WI 54136 (NAICS 238130). OSHA activity number 306795550.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BESSETTE CONSTRUCTION INC
- Site address
- GRAZIES RESTURANT ON KK
- City
- KIMBERLY
- State
- WI
- ZIP
- 54136
- Mailing
- E. 7022 HWY 45, MARION, WI 54950
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- SIC code (legacy)
- 1751
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 10, 2004
- Abate by
- Jun 15, 2004
- Penalty
- Initial $225 · Current $225
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Multiple injuries/death from a falls when working on an unguarded platform attached to a rough terrain lift truck. a) At the site, employees were exposed to multiple and or death created by the use of an elevated work platform which was not designed, constructed, and/or used in accordance with the acceptable requirements of the American Safety Standards for Rough Terrain Forklift Trucks, ASME/ANSI B56.6a-1998 and other acceptable industry practices. For example, when elevating personnel the platform did not meet the following design and use requirements in the following areas: section 8.24.1(l); (1) Provide a restraining means such as a guardrail or a means for securing personnel. Section 8.24.1(f)(1); (2) Did not have the maximum work load and empty weight information prominently marked on the platform, Section 8.24.1(i); (3) Controls were not installed on the elevating platform and/or an operator at the controls. a) At the site, an employee was exposed to a fall hazard when working from an unguarded suspended platform on a 553 Gehl rough terrain forklift. There was no operator at the controls when the employee was suspended. The above conditions were documented through photographs, and interviews. Among other methods, feasible and acceptable means to correct these hazards are to use safer alternate methods such as a scaffold or use a platform approved by the manufacturer meeting the design, manufacture, and requirements os ASME/ANSI B56.6a-1998 for all attachments on rough terrain forklifts. No Abatement Certification or Documentation required.
1926.453 B02 V
- Issued
- Jun 10, 2004
- Abate by
- Jun 14, 2004
- Penalty
- Initial $1,500 · Current $1,500
1926.453 B02 IV
- Issued
- Jun 10, 2004
- Abate by
- Jun 15, 2004
1926.501 B01
- Issued
- Jun 10, 2004
- Abate by
- Jun 14, 2004
- Penalty
- Initial $375 · Current $375
More inspections at Bessette Construction INC
View Bessette Construction INC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 306795550.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.