MIDLAND, TX — 2005-12-23 00:00:00

OSHA Inspection: D G FRAMING CONSTRUCTION

Planned inspection · Safety discipline

At a glance

On 2005-12-23 00:00:00, OSHA opened a planned safety inspection of D G FRAMING CONSTRUCTION in E LOOP 250, MIDLAND, TX 79706 (NAICS 238130). OSHA activity number 307010363.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch D G Framing Construction — free Get an email when a new federal OSHA severe-injury report for D G Framing Construction is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: D G FRAMING CONSTRUCTION
Site address: E LOOP 250
City: MIDLAND
State: TX
ZIP: 79706
Mailing: 3511-A S. COUNTRY ROAD 1195, MIDLAND, TX 79706

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: N

When did the case open and close?

Opened: 2005-12-23 00:00:00
Closing conference: 2005-12-23 00:00:00
Case closed: 2006-02-14 00:00:00
Last modified: 2006-02-16 00:00:00
Data loaded: 2011-10-14 16:38:47

Establishment context

NAICS code: 238130
SIC code (legacy): 1751
Employees: 5
Ownership type: A
Industry flags: Construction safety.

Citations

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 2 instances 5 exposed

Issued: Jan 13, 2006
Abate by: Jan 19, 2006
Penalty: Initial $1,000 · Current $500 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer
did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to the condition(s) listed below:
D G Framing Construction, E Loop 250, Midland, TX.  For the period of time
up to and
including 12/23/05, employees were observed working from elevated
platforms on two sky lifts
without any other employee on the ground to monitor the fork lifts.
ANSI B56.1 - 1975, paragraph 603 states "Powered industrial truck
operators shall abide by the
safety rules and practices in 604, 605, 606 and 607."
ANSI B56.1 - 1975, paragraph 604, section E states "When the operator of
an industrial truck
is dismounted and within 25 feet (7600 mm) of the truck which remains in
his view, the load
engaging means shall be fully lowered, controls neutralized and brakes set
to prevent
movement."
ANSI B56.1 - 1975, paragraph 604, section F states "A powered industrial
truck is unattended
when the operator is 25 feet (7600 mm) or more from the truck which
remains in his view, or
whenever the operator leaves the truck and is not in his view."
ASME/ANSI B56.1 - 1988, paragraph 4.17, section 4.17.1 states "Whenever a
truck is used to
elevate personnel, the following precautions shall be taken for the
protection of the personnel
being elevated:  (b) restraining means such as rails, chains, etc., shall
be in place, or a body belt
with lanyard or deceleration device shall be worn by the person(s) on the
platform."
ASME/ANSI B56.1 - 1988, paragraph 4.17, section 4.17.1 states "Whenever a
truck is used to
elevate personnel, the following precautions shall be taken for the
protection of the personnel
being elevated:  (d) an operator shall be in the control position of the
truck or available to
operate controls."
ASME/ANSI B56.1 - 1988, paragraph 7.34, section 7.34.1.3 states
"Restraining means such as
rails, chains, cable, etc., or a means for securing an operator, such as a
body belt and lanyard
or a deceleration device."
One feasible and acceptable abatement would be to ensure all employees are
trained in and
comprehend the ASME/ANSI standards.

Recent events (2)

2006-01-31 00:00:00 — I (S) $500.00
2006-01-13 00:00:00 — Z (S) $1000.00

1926.501 B10

Serious Gravity 03 1 instance 3 exposed

Issued: Jan 13, 2006
Abate by: Jan 23, 2006
Penalty: Initial $1,000 · Current $500 Reduced

Recent events (2)

2006-01-31 00:00:00 — I (S) $500.00
2006-01-13 00:00:00 — Z (S) $1000.00

1926.503 A02

Serious Gravity 03 8 instances 8 exposed

Issued: Jan 13, 2006
Abate by: Feb 9, 2006
Penalty: Initial $1,000 · Current $500 Reduced

Recent events (2)

2006-01-31 00:00:00 — I (S) $500.00
2006-01-13 00:00:00 — Z (S) $1000.00

1926.602 C01 VIIIA

Serious Gravity 03 1 instance 5 exposed

Issued: Jan 13, 2006
Abate by: Jan 19, 2006
Penalty: Initial $1,000 · Current $500 Reduced

Recent events (2)

2006-01-31 00:00:00 — I (S) $500.00
2006-01-13 00:00:00 — Z (S) $1000.00

More inspections at D G Framing Construction

Dec 10, 2004 ODESSA, TX

View D G Framing Construction's full OSHA safety record →

More inspections in this industry (NAICS 238130)

Jul 17, 2026 M and F Construction LLC · MOUNT JULIET, TN Jul 17, 2026 Carrillo Construction LLC · MERIDIAN, ID Jul 17, 2026 Sevy Brothers Construction LLC · MERIDIAN, ID Jul 17, 2026 M&M Construction Services Corp · WESTFORD, MA Jul 16, 2026 Francisco Arias · FAIRHOPE, AL

More inspections in TX

Jul 17, 2026 Cornelius Nurseries, INC. · RICHMOND, TX Jul 17, 2026 Holloway Houston, INC. · HOUSTON, TX Jul 17, 2026 Voluntary Purchasing Groups, INC. · BONHAM, TX Jul 16, 2026 Rnwbl · SNYDER, TX Jul 16, 2026 United Rentals, INC. · WICHITA FALLS, TX

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307010363.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.