PALATINE, IL ·
OSHA Inspection: A I TECHNOLOGIES, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A I TECHNOLOGIES, LLC. in 666 SOUTH VERMONT STREET, PALATINE, IL 60067 (NAICS 326199). OSHA activity number 307224063.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A I TECHNOLOGIES, LLC.
- Site address
- 666 SOUTH VERMONT STREET
- City
- PALATINE
- State
- IL
- ZIP
- 60067
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 40
- Ownership type
- Private (A)
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 21, 2004
- Abate by
- Jan 26, 2004
- Penalty
- Initial $875 · Current $481 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Tool Room Department, North Wall - The Rollin vertical band saw was not equipped with a magnetic restarter or similar device as prescribed by the American National Standard Institute for Metal Cutting Saws, ANSI B11.10 - 1990, Section 5.2.3.4, that in event an interruption in the electrical supply, would prevent the saw from restarting automatically when power is restored. Employees last used the vertical band saw on or about January 7, 20004. (b) Maintenance Department, North Wall - The Grob vertical band saw was not equipped with a magnetic restarter or similar device as prescribed by the American National Standard Institute for Metal Cutting Saws, ANSI B11.10 - 1990, Section 5.2.3.4, that in event an interruption in the electrical supply, would prevent the saw from restarting automatically when power is restored. Employees last used the vertical band saw on or about December 30, 20003. No abatement certification or documentation is required for this item.
Recent events (2)
- · I (S) $481.25
- · Z (S) $875.00
1910.147 C04 I
- Issued
- Jan 21, 2004
- Abate by
- Mar 9, 2004
- Penalty
- Initial $875 · Current $481 Reduced
Recent events (2)
- · I (S) $481.25
- · Z (S) $875.00
1910.147 C06 I
- Issued
- Jan 21, 2004
- Abate by
- Mar 9, 2004
1910.147 C07 I
- Issued
- Jan 21, 2004
- Abate by
- Mar 9, 2004
1910.212 A01
- Issued
- Jan 21, 2004
- Abate by
- Jan 26, 2004
- Penalty
- Initial $2,500 · Current $1,375 Reduced
Recent events (2)
- · I (S) $1375.00
- · Z (S) $2500.00
1910.212 A03 II
- Issued
- Jan 21, 2004
- Abate by
- Jan 26, 2004
- Penalty
- Initial $875 · Current $481 Reduced
Recent events (2)
- · I (S) $481.25
- · Z (S) $875.00
1910.219 D01
- Issued
- Jan 21, 2004
- Abate by
- Jan 26, 2004
- Penalty
- Initial $2,500 · Current $1,375 Reduced
Recent events (2)
- · I (S) $1375.00
- · Z (S) $2500.00
1910.219 E03 I
- Issued
- Jan 21, 2004
- Abate by
- Jan 26, 2004
1910.332 B01
- Issued
- Jan 21, 2004
- Abate by
- Mar 9, 2004
- Penalty
- Initial $875 · Current $481 Reduced
Recent events (2)
- · I (S) $481.25
- · Z (S) $875.00
1910.333 B02 I
- Issued
- Jan 21, 2004
- Abate by
- Mar 9, 2004
1910.335 A01 I
- Issued
- Jan 21, 2004
- Abate by
- Mar 9, 2004
1910.303 F
- Issued
- Jan 21, 2004
- Abate by
- Jan 26, 2004
More inspections in this industry (NAICS 326199)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 307224063.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.