NORTH RIDGEVILLE, OH —
OSHA Inspection: PLASTIC COMPONENTS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PLASTIC COMPONENTS INC. in 38850 TAYLOR PKWY., NORTH RIDGEVILLE, OH 44039 (NAICS 326199). OSHA activity number 307230771.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Plastic Components INC. — free
Get an email when a new federal OSHA severe-injury report for Plastic Components INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- PLASTIC COMPONENTS INC.
- Site address
- 38850 TAYLOR PKWY.
- City
- NORTH RIDGEVILLE
- State
- OH
- ZIP
- 44039
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 197
- Ownership type
- A
Citations
20 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 12, 2004
- Abate by
- Jul 19, 2004
- Penalty
- Initial $2,450 · Current $2,450
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that: a) Plastic Components, Inc. - North Ridgeville, Ohio: On or about January 16, 2004 the employer failed to ensure that employees were protected from thermal burns due to contact with purged molten plastic from a horizontal injection molding machine (Press #13 - Van Dorn - serial number CV-500). The purge guard was kept open by a bungee cord while the machine operated. The injection mold machine was located on the molding floor. b) Plastic Components, Inc. - North Ridgeville, Ohio: On or about January 16, 2004 the employer failed to ensure that employees were protected from thermal burns due to contact with purged molten plastic from a horizontal injection molding machine (Press #24 - Nissei - serial number S36E020). The purge guard was open while the machine continued to operate. The machine was located on the molding floor. c) Plastic Components, Inc. - North Ridgeville, Ohio: On or about January 16, 2004 the employer failed to ensure that employees were protected from thermal burns due to contact with purged molten plastic from a horizontal injection molding machine (Press #4 - Nissei - serial number S26E073). The purge guard was open while the machine continued to operate. The machine was located on the molding floor. d) Plastic Components, Inc. - North Ridgeville, Ohio: On or about January 28, 2004 the employer failed to ensure that employees were protected from thermal burns due to contact with an uncovered heated injecting barrel on a horizontal injection molding machine (Press #1 - Nissei - serial number S26E007). The barrel guard had been removed from the machine while it continued to operate. The machine was located on the molding floor. One feasible means of abating this hazard is to install purge area guards and injection barrel guards, as supplied by the manufacturer of the specific injection molding machines, and in compliance with ANSI B151.1-1997, Sections 5.3.5 and 5.3.6 (Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use). Additional abatement information is required for this item.
Recent events (3)
- — A (S) $2450.00
- — I (S) $860.00
- — Z (S) $2450.00
5(a)(1)
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
- Penalty
- Initial $1,750 · Current $1,750
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that: a) Plastic Components, Inc. - North Ridgeville, Ohio: On or about January 16, 2004 the employer failed to ensure that the work platform elevated by a powered industrial truck (Nissan - model CUB01-001081; serial number CUB01L155) was secured to the lifting carriage or forks of the industrial truck. An employee was elevated to approximately 12 feet above the floor while changing fuses in overhead electrical installations on the molding floor. One feasible means of abating this hazard is to secure the work platform to the forks or mast of the forklift in accordance with The Safety Standard for Low Lift and High Lift Trucks - ASME B56.1-2000, Sections 4.17.2, 4.17.3, and 7.35.3. No additional abatement information is required for this item.
Recent events (3)
- — A (S) $1750.00
- — I (S) $610.00
- — Z (S) $1750.00
1910.133 A01
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
- Penalty
- Initial $1,750 · Current $1,750
Recent events (3)
- — A (S) $1750.00
- — I (S) $610.00
- — Z (S) $1750.00
1910.138 A
- Issued
- Jul 12, 2004
- Abate by
- Jul 22, 2004
- Penalty
- Initial $2,450 · Current $2,450
Recent events (3)
- — A (S) $2450.00
- — I (S) $860.00
- — Z (S) $2450.00
1910.151 C
- Issued
- Jul 12, 2004
- Abate by
- Jul 20, 2004
- Penalty
- Initial $1,750 · Current $1,750
Recent events (3)
- — A (S) $1750.00
- — I (S) $610.00
- — Z (S) $1750.00
1910.157 G03
- Issued
- Jul 12, 2004
- Abate by
- Aug 5, 2004
- Penalty
- Initial $1,750 · Current $1,750
Recent events (3)
- — A (S) $1750.00
- — I (S) $610.00
- — Z (S) $1750.00
1910.176 B
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
- Penalty
- Initial $1,400 · Current $1,400
Recent events (3)
- — A (S) $1400.00
- — I (S) $490.00
- — Z (S) $1400.00
1910.178 L01 I
- Issued
- Jul 12, 2004
- Abate by
- Jul 22, 2004
- Penalty
- Initial $1,750 · Current $1,750
Recent events (3)
- — A (S) $1750.00
- — I (S) $610.00
- — Z (S) $1750.00
1910.178 P01
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
- Penalty
- Initial $3,500 · Current $3,500
Recent events (3)
- — A (S) $3500.00
- — I (S) $1225.00
- — Z (S) $3500.00
1910.178 Q01
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
Recent events (2)
- — I (S)
- — Z (S)
1910.178 Q07
- Issued
- Jul 12, 2004
- Abate by
- Jul 22, 2004
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A04
- Issued
- Jul 12, 2004
- Abate by
- Aug 12, 2004
- Penalty
- Initial $1,400 · Current $1,400
Recent events (3)
- — A (S) $1400.00
- — I (S) $490.00
- — Z (S) $1400.00
1910.303 G01 I
- Issued
- Jul 12, 2004
- Abate by
- Jul 19, 2004
- Penalty
- Initial $1,750 · Current $1,750
Recent events (3)
- — A (S) $1750.00
- — I (S) $610.00
- — Z (S) $1750.00
1910.22 A01
- Issued
- Jul 12, 2004
- Abate by
- Jul 22, 2004
- Penalty
- Initial $44,000 · Current $44,000
Recent events (3)
- — A (W) $44000.00
- — I (W) $15400.00
- — Z (W) $44000.00
1910.22 B01
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
Recent events (3)
- — A (W)
- — I (W)
- — Z (W)
1910.37 A03
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
- Penalty
- Initial $56,000 · Current $56,000
Recent events (3)
- — A (W) $56000.00
- — I (W) $19600.00
- — Z (W) $56000.00
1910.22 A02
- Issued
- Jul 12, 2004
- Abate by
- Jul 15, 2004
Recent events (3)
- — A (O)
- — I (O)
- — Z (O)
1910.37 A04
- Issued
- Jul 12, 2004
- Abate by
- Sep 7, 2004
Recent events (3)
- — A (O)
- — I (O)
- — Z (O)
1910.147 C04 I
- Issued
- Jul 12, 2004
- Abate by
- Aug 5, 2004
Recent events (3)
- — A (O)
- — I (O)
- — Z (O)
1910.1200 E01
- Issued
- Jul 12, 2004
- Abate by
- Jul 29, 2004
Recent events (3)
- — A (O)
- — I (O)
- — Z (O)
More inspections at Plastic Components INC.
Nov 24, 2008
ELKHART, IN
Feb 10, 2005
ELKHART, IN
Aug 8, 2002
GERMANTOWN, WI
May 15, 2002
MIAMI, FL
Nov 6, 2000
MIAMI, FL
View Plastic Components INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
Jul 16, 2026
Rehrig Pacific Company · LAWRENCEVILLE, GA
Jul 14, 2026
Caplugs, LLC · ERIE, PA
Jul 13, 2026
G & W Precision · WHATELY, MA
Jul 13, 2026
Western Fiberglass INC. · SANTA ROSA, CA
Jul 13, 2026
Continental Structural Plastics · CONNEAUT, OH
More inspections in OH
Jul 17, 2026
Teknol, INC. · DAYTON, OH
Jul 16, 2026
Lippert · PAYNE, OH
Jul 16, 2026
Provia · SUGARCREEK, OH
Jul 16, 2026
Greenacres Foundation · CINCINNATI, OH
Jul 16, 2026
Whirlaway Corporation · WELLINGTON, OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307230771.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.