Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: UXB INTERNATIONAL INC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of UXB INTERNATIONAL INC in SLICK CITY, WHITE SANDS MSL RGE, NM 88002 (NAICS 562998). OSHA activity number 307249078.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch UXB International INC — free Get an email when a new federal OSHA severe-injury report for UXB International INC is published. One employer, no account, unsubscribe in one click.
Site address
SLICK CITY
City
WHITE SANDS MSL RGE
State
NM
ZIP
88002
Mailing
190 LIME QUARRY ROAD, SUITE 212, MADISON, AL 35758
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
562998
SIC code (legacy)
9999
Employees
14
Ownership type
A

2 citations on file for this inspection.

5(a)(1)

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Dec 18, 2007
Abate by
Jan 15, 2008
Penalty
Initial $2,800 · Current $2,800
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to the conditions listed below:
UXB International, Inc., P.O. Box N, White Sands Missile Range, NM 88002;
for the period
of time up to and including July 14, 2007 UXB International, Inc. did not
furnish a place of
employment free from recognized hazards.  UXB International, Inc. at a
site known as Slick
City located in impact area at White Sands Missile Range, New Mexico
employee entered and
performed work inside of an excavation that did not have protection for
employee from the risk
potential collapse, cave-in, or predictable hazards of trenching
operations.  Employer did not
have a trained Competent Person, a Protective System designed by a
Registered Professional
Engineer, and spoil piles had been placed at the edges of the excavation.
Employee
was exposed
to the hazard of trench collapse and cave-in.
Feasible means of abatement may include Competent Person training and the
development of
procedures for trenching/excavating operations.
Recent events (2)
  • — F (S) $2800.00
  • — Z (S) $2800.00

5(a)(1)

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Dec 18, 2007
Abate by
Jan 15, 2008
Penalty
Initial $2,800 · Current $2,800
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to the conditions listed below:
UXB International, Inc., P.O. Box N, White Sands Missile Range, NM 88002;
for the period
of time up to and including July 14, 2007 UXB International, Inc. did not
furnish a place of
employment free from recognized hazards.  UXB International, Inc. at a
site known as Slick
City located in a munitions impact area at White Sands Missile Range, New
Mexico employee
entered into the swing radius of excavation machinery while performing
work
at this site.
Employer did not have a procedure in place to protect personnel from the
hazard of entering the
swing radius (approximately 30') of machinery being used for excavation
project.  Employee
was exposed to the hazard of getting struck by excavator being used to
extract ordnance.
Employer was in daily communication with employee regarding the status of
ordnance recovery.
Feasible abatement may include a written procedure for
trenching/excavating operations and
employee training on these procedures.
Recent events (2)
  • — F (S) $2800.00
  • — Z (S) $2800.00

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307249078.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.