Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BAXLEY VENEER AND CLEAT CO.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BAXLEY VENEER AND CLEAT CO. in HWY 341 WEST, BAXLEY, GA 31513 (NAICS 321920). OSHA activity number 307410423.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Baxley Veneer and Cleat CO. — free Get an email when a new federal OSHA severe-injury report for Baxley Veneer and Cleat CO. is published. One employer, no account, unsubscribe in one click.
Site address
HWY 341 WEST
City
BAXLEY
State
GA
ZIP
31513
Mailing
P.O. BOX 367, BAXLEY, GA 31515
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321920
SIC code (legacy)
2449
Employees
31
Ownership type
A
Industry flags
Manufacturing safety.

9 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 2 exposed
Issued
May 25, 2006
Abate by
Jun 7, 2006
Penalty
Initial $1,750 · Current $875 Reduced
P.L. 91-596 Section 5(a)(1) of the Occupational Safety and Health Act of
1970: The employer
did not furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that
employees were exposed to the hazard(s) of falling:
a)  Dryer Area - Two employees were observed working from an elevated
platform,
approximately 8 feet high, which had not been provided with a guardrail
system and was not
firmly secured to the forks.
Amoung other methods, one feasible and acceptable abatement method to
correct this hazard is:
Provide an approved platform designed for this purpose, securely attached
to the forks.
For additional assistance please refer to ASME B56-1b-2003 Safety Standard
for Rough Terrain
Forklift Trucks, Part III, Section 7.37.on
Recent events (2)
  • — I (S) $875.00
  • — Z (S) $1750.00

1910.132 D01

Serious Gravity 02 1 instance 2 exposed
Issued
May 25, 2006
Abate by
Jun 7, 2006
Penalty
Initial $1,400 · Current $700 Reduced
Recent events (2)
  • — I (S) $700.00
  • — Z (S) $1400.00

1910.133 A01

Serious Gravity 02 1 instance 2 exposed
Issued
May 25, 2006
Abate by
Jun 7, 2006
Penalty
Initial $1,400 · Current $700 Reduced
Recent events (2)
  • — I (S) $700.00
  • — Z (S) $1400.00

1910.133 A03

Serious Gravity 02 1 instance 2 exposed
Issued
May 25, 2006
Abate by
Jun 7, 2006

1910.215 A04

Serious Gravity 01 1 instance 3 exposed
Issued
May 25, 2006
Abate by
May 31, 2006
Penalty
Initial $1,050 · Current $525 Reduced
Recent events (2)
  • — I (S) $525.00
  • — Z (S) $1050.00

1910.215 B09

Serious Gravity 01 1 instance 2 exposed
Issued
May 25, 2006
Abate by
May 31, 2006
Penalty
Initial $1,050 · Current $525 Reduced
Recent events (2)
  • — I (S) $525.00
  • — Z (S) $1050.00

1910.213 R04

Serious Gravity 10 1 instance 1 exposed
Issued
May 25, 2006
Abate by
May 31, 2006
Penalty
Initial $3,500 · Current $1,750 Reduced
Recent events (2)
  • — I (S) $1750.00
  • — Z (S) $3500.00

1910.305 B01

Serious Gravity 01 2 instances 3 exposed
Issued
May 25, 2006
Abate by
May 31, 2006
Penalty
Initial $1,050 · Current $525 Reduced
Recent events (2)
  • — I (S) $525.00
  • — Z (S) $1050.00

1910.305 B02

Serious Gravity 03 2 instances 3 exposed
Issued
May 25, 2006
Abate by
May 31, 2006
Penalty
Initial $1,750 · Current $875 Reduced
Recent events (2)
  • — I (S) $875.00
  • — Z (S) $1750.00

View Baxley Veneer and Cleat CO.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307410423.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.